Home
Examples
The Feko Example Guide contains a collection of examples that teaches you Feko concepts and essentials.
EMC Analysis and Cable Coupling
Simple examples demonstrating electromagnetic compatibility (EMC) analysis and cable coupling.
Antenna Radiation Hazard (RADHAZ) Safety Zones
Calculate the safety zones around a Yagi-Uda antenna based on radiation INIRC88 and NRPB89 standards. View the safety zone ISO surfaces.
Viewing the Results
View and post-process the results in POSTFEKO.
INIRC 88 Standard
The definition for electric and magnetic field limits according to INIRC 88 between 0.4 GHz to 2.0 GHz.

Welcome
Release Notes
See what's new in the latest release.
Get Started
The Feko Getting Started Guide contains step-by-step instructions on how to get started with Feko.
Examples
The Feko Example Guide contains a collection of examples that teaches you Feko concepts and essentials.
- Antenna Synthesis and Analysis
  Simple examples demonstrating antenna synthesis and analysis.
- Antenna Placement
  Simple examples demonstrating antenna placement.
- Radar Cross Section (RCS)
  Simple examples demonstrating radar cross section (RCS) calculations of objects.
- EMC Analysis and Cable Coupling
  Simple examples demonstrating electromagnetic compatibility (EMC) analysis and cable coupling.
  - Shielding Factor of a Sphere with Finite Conductivity
    Calculate the shielding factor of a hollow sphere with finite conductivity. The sphere is constructed from a lossy metal with a thickness of 2.5 nm.
  - Calculating Field Coupling into a Shielded Cable
    Calculate the coupling between a monopole antenna and a nearby shielded cable that follows an arbitrary path above a ground plane.
  - A Magnetic-Field Probe
    Calculate the segment current on a magnetic-field probe as a function of the plane wave incidence angle.
  - Antenna Radiation Hazard (RADHAZ) Safety Zones
    Calculate the safety zones around a Yagi-Uda antenna based on radiation INIRC88 and NRPB89 standards. View the safety zone ISO surfaces.
    - Creating the Model
      Create the model in CADFEKO. Define any ports and sources required for the model. Specify the operating frequency or frequency range for the model.
    - Defining Calculation Requests
      Define the calculation requests in CADFEKO.
    - Modifying the Auto-Generated Mesh
      Modify the model mesh in CADFEKO using the correct settings. A mesh is a discretised representation of a geometry model or mesh model used for simulation in the Solver.
    - Running the Feko Solver
      Run the Solver to compute the calculation requests.
    - Viewing the Results
      View and post-process the results in POSTFEKO.
      - Script - Create Dataset
        This script illustrates how the INIRC 88 safety standards and NRPB 89 safety standards are added as a dataset that allows you to plot the threshold values on a graph.
      - INIRC 88 Standard
        The definition for electric and magnetic field limits according to INIRC 88 between 0.4 GHz to 2.0 GHz.
        Script - RADHAZ Safety Zone Using INIRC 88 Standard
        This script generates a near field result that incorporates the calculated near fields and the INIRC 88 safety standards for occupational limits.
      - NRPB 89 Standard
        The definition for electric and magnetic field limits according to NRPB 89 between 0.4 GHz to 2.0 GHz.
- Waveguide and Microwave Circuits
  Simple examples demonstrating using waveguides and microwave circuits.
- Bio Electromagnetics
  Simple examples demonstrating phantom and tissue exposure analsysis.
- Time Domain
  A simple example demonstrating the time analysis of an incident plane wave on an obstacle.
- Special Solution Methods
  Simple examples demonstrating using continuous frequency range, using the MLFMM for large models, using the LE-PO (large element physical optics) on subparts of the model and optimising the waveguide pin feed location.
- User Interface Tools
  Simple examples demonstrating using Feko application automation, matching circuit generation with Optenni Lab and optimising a bandpass filter with HyperStudy.
Introduction to Feko
Feko is a comprehensive electromagnetic solver with multiple solution methods that is used for electromagnetic field analyses involving 3D objects of arbitrary shapes.
CADFEKO
CADFEKO is used to create and mesh the geometry or model mesh, specify the solution settings and calculation requests in a graphical environment.
POSTFEKO
POSTFEKO, the Feko post processor, is used to display the model (configuration and mesh), results on graphs and 3D views.
EDITFEKO
EDITFEKO is used to construct advanced models (both the geometry and solution requirements) using a high-level scripting language which includes loops and conditional statements.
Feko Solution Methods
One of the key features in Feko is that it includes a broad set of unique and hybridised solution methods. Effective use of Feko features requires an understanding of the available methods.
Optimisation in Feko
Feko offers state-of-the-art optimisation engines based on generic algorithm (GA) and other methods, which can be used to automatically optimise the design and determine the optimum solution.
Feko Utilities
The Feko utilities consist of PREFEKO, OPTFEKO, ADAPTFEKO, the Launcher utility, Updater and the crash reporter.
Description of the Output File of Feko
Feko writes all the results to an ASCII output file .out as well as a binary output file .bof for usage by POSTFEKO. Use the .out file to obtain additional information about the solution.
Feko Application Macros
A large collection of application macros are available for CADFEKO and POSTFEKO.
Scripts and Application Programming Interface (API)
CADFEKO and POSTFEKO have a powerful, fast, lightweight scripting language integrated into the application allowing you to create models, get hold of simulation results and model configuration information as well as manipulation of data and automate repetitive tasks.
Appendix
Reference information is provided in the appendix.

INIRC 88 Standard

The definition for electric and magnetic field limits according to INIRC 88 between 0.4 GHz to 2.0 GHz.


Field type	Definition (f in MHz)	Unit
Electric field	$3 \sqrt{f}$	V/m
Magnetic field	$0.008 \sqrt{f}$	A/m