END RING

End ring - Overview
END RING – DESIGN - design area
1 Selection of the ROTOR subset: END RING panel (Click on the icon END RING)
2 Visualization of the axial view of the machine
3 DESIGN tab indicates the tools to define the end ring topology and parameter values
Note: By default, DESIGN tab is selected
4

A section scrolling bar allows choosing the section in which user inputs are defined.

Scrolling selection bar where Design, Impedance, X-Factor and operating conditions sections can be selected.
5

Definition of the end ring dimensions on both sides of the machine.

Definition of each end ring geometrical input, with the corresponding arrow on the axial view of the machine
6 Buttons to restore default input values. See “Part Factory” application for more information.
7 Buttons to apply inputs (Pressing the “enter key” twice applies inputs too).
8 End ring outputs (read only)
9 Icon to export end ring data into *.txt or *.xls files.

End ring – Design – Inputs / Outputs
END RING - DESIGN – design area
1 Selector to choose same end ring topologies on both sides
2 Definition of each end ring geometrical input, with the corresponding arrow on the axial view of the machine

End ring - Inter bar Impedance - Overview

The aim of this section is to compute the inter bar impedance of the squirrel cage.
END RING - IMPEDANCE area
1 Shortcut panels to navigate in the impedance results
2 Main window for results
3 Button to open calibration factor window
4 Automatic computation mode
5 Constant computation mode
6 Icon to export end ring impedance data into *.txt or *.xls files.