Home
Create Analysis
Create an analysis for your project.
Structural
Multi-loadcases
You can use Multi-loadcases to run multiple linear structural analyses with common constraints. Linear structural analysis assumes the model is loaded slowly (static) and stresses do not exceed the yield strength of any part material (linear).
Add New Loadcase
Add a new loadcase to the analysis.

Welcome
What's New
View new features for SimSolid 2024.1.
Get Started
Learn the basics and discover the workspace.
Tutorials
Discover SimSolid functionality with interactive tutorials.
Interface with External Products
Interfaces that support SimSolid output file format.
Geometry
Information about treatment and properties of geometric entities in SimSolid.
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
Create Analysis
Create an analysis for your project.
- Structural
  - Linear Structural Analysis
    Analysis that assumes the model is loaded slowly (static) and stresses do not exceed the yield strength of any part material (linear).
  - Non-linear Structural Analysis
    Three types of non-linear analysis are currently available: non-linear separating contact, geometric non-linear, and material non-linear.
  - Buckling Linear
    You can create and solve linear buckling problems in structural analysis.
  - Multi-loadcases
    You can use Multi-loadcases to run multiple linear structural analyses with common constraints. Linear structural analysis assumes the model is loaded slowly (static) and stresses do not exceed the yield strength of any part material (linear).
    - Add New Loadcase
      Add a new loadcase to the analysis.
  - Sequential
    Sequential analysis is any type of structural analysis performed on a structure under prior loading (also termed preloading or prestressing).
  - Structural Thermal
    Structural analysis linked to steady state, transient thermal, thermal imported, or temperature load can be created using the Structural Thermal Workbench.
- Modal
- Dynamics
  Evaluate your design in real-time using SimSolid dynamics analysis.
- Thermal
  Thermal analysis predicts how thermal effects propagate through the model. Steady state and thermal transient analyses are supported.
- Fatigue
  Fatigue analysis is intended for predicting life of structures under cyclic loading.
Boundary Conditions
Boundary Conditions available for SimSolid.
Post Processing
Run analyses and view a variety of results in SimSolid.
Design Study
Design studies allow you to quickly evaluate and compare the structural performance from different design scenarios.
Verification Problems
Solved verification models.
Frequently Asked Questions
This section provides quick responses to typical and frequently asked questions regarding

Add New Loadcase

Add a new loadcase to the analysis.

In the Project Tree, open the Multi-loadcases Workbench.
On the workbench toolbar, click (Load cases) > Create new.
The new loadcase appears in the Project Tree. You can apply loads in each individual load case.
See Imported Forces and Imported Remote Loads for information on importing loads for multi-loadcases.