result tensor create

<name>

The name of the tensor.

<name1>=<value1>

The name=value data name and/or attribute pairs that define the relevant data for the plot. For attributes, this can be either the attribute name or ID.

averageatnode=<true/false>

Averages elemental tensors to nodes.

cornerdata=<true/false>

If corner data is available, enter true to use the Use corner data option, which displays color bands by interpolating available corner results within each element.

format=<principal/component>

Select the tensor format.

layer=<layer>

The layer definition.

layerfilter=<layerfilter id / layerfilter label?>

Enter the filter ID and value to reduce the layer list.

marked = <true/false>

Enable/disabled marked elements.

principal/component

Load or display any principal or component of a tensor. They include:

• p1major= <true/false>
• p2mid= <true/false>
• p3minor= <true/false>
• xx=<true/false>
• yy=<true/false>
• zz=<true/false>
• xy=<true/false>
• yz=<true/false>
• zx=<true/false>

projectionrule=<none/xy/xz/yx/yz/zx/zy>

For shell (or planar) elements, results in any 3D coordinate system can be projected onto the element plane. Enter none to not use the projection rule.

showmidnoderesults=<true/false>

Calculate and show the tensors at the mid-side nodes if it is not available in the results file.

sset = <sset name>

Enter a selection set name.

system=<analysis/global/elemental/system name>

Enter the coordinate system type that will be used to calculate the results.

type =<typel>

The result type.

Create tensor datatype definitions:

result tensor create "Stress, Mid, Analysis System" layer=\"Mid\" type=\"Stress\"