Remove Solid Holes
Use the Defeature: Holes tool to remove solid holes in the model.
Note: This feature is not supported for a model with discrete
geometry.
-
From the Geometry ribbon, click the tool.
Figure 1. 
- Optional:
On the guide bar, click
to define settings used to
find and select holes of a specific size.
-
On the guide bar, click Find.
Holes in the model are selected and highlighted red.
-
Review each found hole by clicking
and
on
the guide bar.
-
Remove holes in the following ways:
- Remove all found/selected holes by clicking Remove All.
- Remove individual holes by left-clicking.