Remove Logos

Use the Defeature: Logos tool to find and remove logos.

  1. From the Geometry ribbon, click the Defeature > Logos tool.
    Figure 1.

  2. Optional: On the guide bar, click to define settings for logo detection.
  3. On the guide bar, click Find to detect logo surfaces in the modeling window.
    For models with discrete topology, the find option is disabled; you need to manually select the base surface in the modeling window. The logo surfaces will be highlighted.
  4. Remove logos in the following ways:
    1. Remove all found/selected logos by clicking Remove All.
    2. Remove individual logos by left-clicking.