Export Design to EDA Vendor Formats

PollEx PCB supports exporting to other EDA vendors’ format.

From the menu bar, click PollEx PCB > File > Export To. PollEx PCB can export eight different types of EDA vendors: Ansys Neutral File, Ansys SIWave File, Cadence Sigrity File, Keysight 3070, Keysight ADS File, Keysight ABL File(XML), Zuken Hostage, and IPC-2581B.
Restriction: If a design file does not have net lists or layer stackup information, it cannot be exported to EDA vendor formats.

Ansys Neutral (*.anf)

Using this menu, you can export file to be used in Ansys Neutral. From the menu bar, click File > Export To > Ansys Neutral (*.anf).


Figure 1.

Ansys SIwave (*.siw)

Using this menu, you can export file to be used in Ansys SIWave. From the menu bar, click File > Export To > Ansys SIwave (*.siw).


Figure 2.

Cadence Sigrity (*.spd)

Using this menu, you can export file to be used in Sigrity SPD. From the menu bar, click File > Export To > Cadence Sigrity (*.spd).


Figure 3.

Keysight 3070

Using this menu, you can export file to be used in Keysight 3070. From the menu bar, click PollEx PCB > File > Export To > Keysight 3070.

PollEx PCB supports AGILENT i3070 format and exports a location report for test point.


Figure 4.

Keysight ADS File

Using this menu, you can export file to be used in Keysight ADS. From the menu bar, click PollEx PCB > File > Export To > Keysight ADS (*.adfi).

Keysight ABL (*.xml)

Using this menu, you can export file to be used in Keysight ABL. From the menu bar, click PollEx PCB > File > Export To > Keysight ABL (*.xml).

Zuken Hot-Stage (*.rif)

Using this menu, you can export file to be used in Zuken Hotstage. From the menu bar, click PollEx PCB > File > Export To > Zuken Hot-Stage (*.rif).


Figure 5.

IPC-2581B

Using this menu, you can export file to be used in IPC-2581. From the menu bar, click PollEx PCB > File > Export To > IPC-2581B.