Block JIG Generator GUI

Learn the Block JIG Generator interface.

The Block JIG Generator interface contains the following sections:

Load Editing: Load the saved job file (*.PBRJI).
Save Editing: Save the Block JIG Generator job as a file (*.PBRJI).
Setting Rule: Set the rules for creating the Block JIG. Refer to Block JIG Rule Setup.
Base Line: Enter the information for creating the Block JIG baseline. Refer to PCB Outline and Bridge Recognition.
Vacuum Hole: Enter the vacuum hole for PCB absorption on the Block JIG. Refer to Create Vacuum Hole and Component Support.
Component Height: Enter the height to build the component support. Refer to Create Vacuum Hole and Component Support.
Generate Boundary Line: Generate the Block JIG boundary line. Refer to Generate JIG Data.
Generate Shared Block: Generate the engraved area for mounting the panel PCB. Refer to Generate JIG Data.
Generate Bottom: Generate unevenness on the opposite of the Block Jig. Refer to Generate JIG Data.
Export Gerber: Export the generated Block JIG data to the Gerber format. Refer to Export JIG Data.
Export DXF: Export the generated Block JIG data to the DXF format. Refer to Export JIG Data.