Home
Setup
Prepare your model and run the simulation.
General Setup
Prepare your model for a general AcuSolve simulation.
Solution
Define output conditions, run the simulation, and view the results.
Simulation
Run AcuSolve, track solver and meshing jobs, and plot run time data.
Convert AcuSolve Results
Use the Convert tool to convert AcuSolve run data to tabular text file data, h3d, AcuFieldView, EnSight, and CGNS format.

Welcome
What's New
View new features for HyperMesh CFD 2024.1.
Get Started
Learn the basics and discover the workspace.
Onboarding Resources
Discover HyperMesh CFD functionality with interactive tutorials and community resources.
Solution Layers
Solution-centric workflows allow you to traverse through modeling environments using a dedicated UI layer.
Manage Files and Data
Create, open, import, and save models.
Convert
Use the Convert tool to convert entire models between data types.
Geometry Modeling
Manage CAD, FE, and 2D parametric sketch geometry.
Meshing
Generate surface/volume mesh by defining mesh controls, or interactively create and edit 2D surface mesh.
Setup
Prepare your model and run the simulation.
- General Setup
  Prepare your model for a general AcuSolve simulation.
  - Flow
    Set up the simulation model, materials, domains, and boundaries.
  - Radiation
    Define radiation conditions and create emissivity models.
  - Motion
    Define direct, derived, and constrained mesh motion.
  - Solution
    Define output conditions, run the simulation, and view the results.
    - Monitors
      Define probe points and rakes, surface monitors, and volume monitors.
    - Outputs
      Define nodal output for the entire model.
    - Nodal Initial Conditions
      Define nodal initial conditions for the simulation. You can define nodal initial conditions on the nodes of selected surfaces and solids, nodes within zones, and nodes of solids on the side of a plane.
    - Simulation
      Run AcuSolve, track solver and meshing jobs, and plot run time data.
      - Run an AcuSolve Simulation
        Use the Run tool to define run settings and submit an AcuSolve job.
      - View Solver and Mesh Status
        Use the Manage tool to track solver and meshing jobs.
      - Plot Run Time Data
        Use the Plot tool to track converged and derived solution behavior in real time.
      - Convert AcuSolve Results
        Use the Convert tool to convert AcuSolve run data to tabular text file data, h3d, AcuFieldView, EnSight, and CGNS format.
  - AcuTrace
    AcuTrace is particle tracer that runs as a post-processor to AcuSolve.
- Aerodynamic and Aeroacoustic Setup
  Prepare your model for wind tunnel analysis using ultraFluidX.
Post-Processing
Post-process the simulation results by creating visualizations and measurements.
Automation
Automate simulation processes with templates and utility scripts.
Design Exploration
Once the baseline model is prepared, you can define morph volumes, morph geometry, create design shapes and run DOE studies. These tool work for both AcuSolve and ultraFluidX-based workflows.
Solver Help
More resources for AcuSolve and ultraFluidX solvers.

Convert AcuSolve Results

Use the Convert tool to convert AcuSolve run data to tabular text file data, h3d, AcuFieldView, EnSight, and CGNS format.

From the Solution ribbon, click the Convert tool.

Figure 1.

The AcuSolve Data Translator dialog opens.
Open the .log file of an AcuSolve simulation run.
Available variables are extracted based on the output format.
Select an output format.
Select desired variables.
Select a time steps and/or parts.
Click Convert.
Converted data is stored in the same folder as the .log file.