CreateCoilWithSolidConductor.PFM

Description

Create coil with each turn defined as a solid conductor.

Note: For more details about this macro, consult this additional document

Input

  • The diameter of the wire
  • The height of the coil
  • The length of the coil
  • The number of turns in the coil height
  • The number of turns in the coil length
  • The thickness of the insulator
  • The coordinate system in the left down corner of the coil

Output

  • The geometry of the coils with all the turns
  • A circuit with one solid conductor component for each turn, connected in serial to a current source
  • A face region of type solid conductor for each turn