Additional Analysis Controls
This Panel Consists of some useful additional analysis controls for solver.
| Parameter | Description |
| Thermal Network Activation | Global control to Activate & Deactivate Thermal Networks |
| Shut-off Branches with closed elements |
Controls Shut off branch mass flow rate calculations 0: Shuts off the branches with closed elements with zero flow (Default) 1: Shuts of Closed Valve, & let the branches to calculate flows 2: Allow Closed Valves to leak & let the branches to calculate flows |
| Sink Boundary Chamber Output |
Options for Sink Chamber Output 0: Calculates based on flow Entering the chamber 1: Retain User inputs |
| Adiabatic Run Options |
Controls/Modify Tube Wall T, HT etc 0: Run the Model with heat transfer (Default) 2: All Adiabatic (Disables all Heat transfer calculations) |
| Temperature Change due to gravity |
Controls Temperature change due to Gravity & Pumping 0: No Change 1: Isentropic T Change |
| Max.Single Element Delta.T | Controls the Maximum Temperature rise across the elements during iterations |
| Chamber Fluid Pressure Lower Limit (psi) |
Chamber fluid pressure lower limit in psia. Default = .001 psia for gas and -20,000 psia for liquid. A negative pressure for liquids indicates cavitation. |
| Chamber Fluid Pressure Upper Limit (psi) |
Chamber fluid pressure upper limit in psia. Default = 20,000 psia for gas and liquid.
|
| Chamber Fluid Temperature Lower Limit (deg F) | Chamber fluid temperature lower limit in deg F. Default = -458 deg F for gas and liquid. |
| Chamber Fluid Temperature Lower Limit (deg F) | Chamber fluid temperature upper limit in deg F. Default = 9999 deg F for gas and liquid. |