Manufacturing Process

Check the size of Pin Pad and Pin Pitch to distinguish the FPCB manufacturing process.

  • Checking
    • Add New Checking List: Add one line into the table. One line in the table is corresponds to one checking condition.
    • Item: Specify the item name.
    • Mark: Specify the size range of the pad size.
      • <: Pad size should be smaller than the given pad size.
      • ≤: Pad size should be smaller or equal than the given pad size.
      • ≥: Pad size should be bigger or equal than the given pad size.
      • =: Pad size should be equal than the given pad size.
      • >: Pad size should be bigger than the given pad size.
    • Pad Size: Set the target pad size.
    • AND/OR: For measuring two sizes, pad size and pin pitch, you can make a composition. AND means pad size range and pin pitch ranges should be matching with the given condition. OR means if one of the conditions is matches the given setting, it will be passed in checking.
    • Mark
      • <: Pin pitch size should be smaller than the given pin pitch value.
      • ≤: Pin pitch size should be smaller or equal than the given pin pitch value.
      • ≥: Pin pitch size should be bigger or equal than the given pin pitch value.
      • =: Pin pitch size should be equal than the given pin pitch value.
      • >: Pin pitch size should be bigger than the given pin pitch value.
    • Pin Pitch: Set the target pin pitch value.