Inputs - Outputs


Assign Materials to MAGNETS in the rotor
1	Expand the section dedicated to magnets. Several magnet materials can be assigned to the same rotor pole. Here four magnets are defined. Different magnet materials can be assigned to each of them.
2	By selecting a region name (Magnet1A for example) the corresponding face region is highlighted.
3	Expand the material list to choose a magnet material to assign to the selected magnet.
4	Button to restore default materials. Default materials are those defined as favorite materials in Material manager. See “Materials” application for more information.
5	Button to validate assignment of materials. Pressing the Enter key twice applies inputs too.

Assign Materials to MAGNETS in the rotor

1

Expand the section dedicated to magnets.

Several magnet materials can be assigned to the same rotor pole.

Here four magnets are defined. Different magnet materials can be assigned to each of them.

2

By selecting a region name (Magnet1A for example) the corresponding face region is highlighted.

3

Expand the material list to choose a magnet material to assign to the selected magnet.

4

Button to restore default materials.

Default materials are those defined as favorite materials in Material manager.

See “Materials” application for more information.

5

Button to validate assignment of materials. Pressing the Enter key twice applies inputs too.