Formats d'import
Formats d'import
Le tableau suivant récapitule les différents formats de fichiers acceptés par Flux en fonction du type d'import :
| Type d'import | Format de Fichier | Extension | Type de format |
|---|---|---|---|
| Import de géométrie dit « standard » | IGES (Initial Graphics Exchange Specification) | *.IGES, *.IGS | Standard |
| STEP (Standard for Exchange of Product) | *.STEP, *.STP | ||
| DXF (Draw eXchange File) | *.DXF | ||
| STL (STereo Lithography) | *.STL | ||
| FBD (Flux 2D géométrie) | *.FBD | Propriétaire | |
| Import de maillage | NASTRAN neutre | *.NAS, *.DAT | Standard |
| PATRAN neutre | *.PAN, *.DAT | ||
| UNV (UNiVersal Ideas Master Serie) | *.UNV | ||
| MED (Modèle d'échange de données) | *.MED | ||
| HyperMesh/SimLab/OptiStruct (format Nastran) | *.BDF, *.BLK, *.BULK, *.DAT, *.FEM, *.NAS, *.NASTRAN | ||
| Import de géométrie dit « en mode avancé » | IGES (Initial Graphics Exchange Specification) | *.IGES, *.IGS | Standard |
| STEP (Standard for Exchange of Product) | *.STEP, *.STP | ||
| SAT | *.SAT | Propriétaire | |
| CATIA V4 | *.MODEL | ||
| CATIA V5 | *.CATPRODUCT, *.CATPART | ||
| INVENTOR | *.IPT | ||
| PROE (Pro Engineer) | *.ASM , *.PRT |
Versions supportées
Le tableau suivant récapitule pour les différents formats d'import les versions supportées par ACIS version R22 :
| Type d'import | Format de Fichier | Versions supportées |
|---|---|---|
| import de géométrie dit « en mode avancé » | IGES (Initial Graphics Exchange Specification) | jusqu'à IGES 5.3 |
| STEP (Standard for Exchange of Product) | STEP AP203 et AP214 (géométrie seulement) | |
| SAT | jusqu'à ACIS R22 | |
| CATIA V4 | de CATIA 4.1.9 à CATIA 4.2.4 | |
| CATIA V5 | de CATIA V5 R6 à R20 | |
| PROE (Pro Engineer) | de Pro/E 16 à Wildfire 5 |
Type de fichier supporté
Pour l'import, Flux ne supporte que les fichiers en format texte. Les fichiers binaires ne sont pas acceptés.
Avertissement : Il n'est pas possible d'importer le fichier
d'assemblage de plusieurs fichiers au format IGS (*_ASM.IGS).
Import multiple
Les imports multiples sont possibles. Flux est capable d'importer dans le même projet des fichiers de différents formats : DXF, STL, etc.