BasicSectorExtractor.PFM

Description

Help to generate a part for FluxMotor analysis starting from a CAD file or a geometry created with Flux.

Note: For more details about this macro, consult this additional document

Input

  • 1. Number of full sectors of the machine
  • 2. Sector inner diameter
  • Or select a point on the inner diameter
  • 3. Sector outer diameter
  • Or select a point on the outer diameter
  • 4. Angular position of sector axis
  • Or select a line on the sector axis
  • 5. Symmetrical part (yes or no)
  • 6. CAD line discretization (0.1-1)
  • 7. Curved edge deviation factor (0.1-1)
  • 8. Save project as (optional)

Output

  • The geometry is modified