Home
Model Setup - Foaming Ribbon
Set up your foam part, nozzles, materials, tooling and process parameters prior to analysis.
Nozzle
Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.

Welcome
What's New
Discover new features and enhancements.
Get Started
New to Inspire PolyFoam? Learn the basics here.
Tutorials
Start using Inspire PolyFoam with our interactive tutorials.
Parametric Modeling
Create 2D sketches, surfaces, and solids with construction history and variables.
Model Setup - Foaming Ribbon
Set up your foam part, nozzles, materials, tooling and process parameters prior to analysis.
- Pouring Cup Test
  Use the basin (cup) icon to run an optional pouring cup test to evaluate a material that you want to assign to your model for a foaming simulation.
- Foam Part
  Use the Foam Part icon to designate the foam part in your model geometry.
- Nozzle
  Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.
  - Add/Edit Nozzles
    Add or edit a nozzle system that includes travel paths or stationary points for releasing the foaming chemicals into the mold, nozzle size, foam injection direction, mass flow rate, and material-flow start and end times.
  - Import Nozzles
    Import nozzle data from an existing .csv or .txt file.
- Materials
  Review, create, import, export, modify and assign materials through the Materials dialog.
- Tooling
  Use the tools in the Tooling sub-ribbon to designate Velcro components, designate inserts, designate guiders, create or designate a mold, create a nonwoven backing cloth, and create vents.
Model Setup - Dispensing Ribbon
Set up your part, nozzles, materials, tooling and process parameters prior to analysis.
PolyFoam Analysis
Run an analysis to minimize defects and prevent manufacturing problems for a foam part design.
Dispensing Analysis
Run an analysis to minimize defects and prevent manufacturing problems for a fluid part design.
Frequently Asked Questions
Got questions? We have answers!

Nozzle

Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.

Location: Foaming ribbon, Nozzle icon