Home
Tutorials
Discover nanoFluidX functionality with interactive tutorials.
Video Tutorials
NFX-T: 1030 ParaView Post-processing In-plane Streamlines and Vectors
Learn how to create streamlines and vectors within a slice.

Welcome
What's New
View new features for nanoFluidX 2024.1.
Get Started
Tutorials
Discover nanoFluidX functionality with interactive tutorials.
- Video Tutorials
  - NFX-T: 1000 Simple Single Phase Gearbox
    Set up a simple single phase gearbox for drive train oiling simulation using SimLab for CFD-nanoFluidX solution. Oil distribution will be analyzed and basics of the post-processing in SimLab will be demonstrated.
  - NFX-T: 1005 Simple Two Phase Gearbox
    Set up a simple two phase gearbox for drive train oiling simulation using SimLab for CFD-nanoFluidX solution.
  - NFX-T: 1010 Basic Post-processing
    Learn how to post-process nanoFluidX results in ParaView, analyze a simple multiphase gearbox, and plot various transient and time average results.
  - NFX-T: 1020 ParaView Rendering
    Learn how to setup a rendering process in ParaView using transient data of a simple multiphase gearbox case and create a rendering video.
  - NFX-T: 1030 ParaView Post-processing In-plane Streamlines and Vectors
    Learn how to create streamlines and vectors within a slice.
  - NFX-T: 1040 Moving Vehicle Setup
    Set up a moving vehicle wading simulation using SimLab for CFD-nanoFluidX solution.
  - NFX-T: 1045 Static Vehicle Setup
    Set up a static vehicle wading simulation using SimLab for CFD-nanoFluidX solution.
  - NFX-T: 1050 Water Management Custom Drain
    Set up a water management simulation using SimLab for CFD-nanoFluidX solution.
Pre-processing
Create a nanoFluidX model using SimLab.
Command Reference
nanoFluidX commands and parameters with examples.
Post-processing
Theory Manual
Physics and theory for nanoFluidX.
Validation Manual
Error and Warning Messages
This glossary contains generic messages generated by nanoFluidX, their likely causes, and possible methods to resolve the related issues.
Frequently Asked Questions
This section provides quick responses to typical and frequently asked questions regarding nanoFluidX.
Bibliography
References used throughout the nanoFluidX manual.

NFX-T: 1030 ParaView Post-processing In-plane Streamlines and Vectors

Learn how to create streamlines and vectors within a slice.

In this lesson you will learn how to:

Create surface vectors
Create stream tracers
Plot streamlines
Create a glyph

Prerequisites

To run this simulation, you will need access to a licensed version of ParaView.

Model Files

Before you begin, copy the file(s) used in this tutorial to your working directory.

ParaView_Postprocessing_In-plane_Streamlines_Vectors.zip

Tutorial Video

Additional Resources

For more tutorials, visit the SimLab Learning Center.