Home
Pre-processing
Create a nanoFluidX model using SimLab.
Drivetrain Oiling
Set up a drivetrain simulation.
Material
In the drivetrain oiling solution, fluid material parameters can be defined either manually or by selecting from a wide range of pre-defined materials in the SimLab built-in material database.

Welcome
What's New
View new features for nanoFluidX 2025.
Get Started
Tutorials
Discover nanoFluidX functionality with interactive tutorials.
Pre-processing
Create a nanoFluidX model using SimLab.
- Recommended Settings and Customizations for SimLab
  Define settings for a nanoFluidX and SimLab connection.
- Drivetrain Oiling
  Set up a drivetrain simulation.
  - Material
    In the drivetrain oiling solution, fluid material parameters can be defined either manually or by selecting from a wide range of pre-defined materials in the SimLab built-in material database.
  - Boundary Conditions
  - Measurements
  - Particles
    Generate a uniformly distributed particles for the nanoFluidX solver.
- Vehicle Wading Solution
  Set up a vehicle wading simulation.
- Water Management
- Tank Sloshing Solution
  Set up a tank sloshing simulation.
- Export and Data Check
  Before exporting a model, the setup can be verified and checked for errors using the Data Check tool.
Command Reference
nanoFluidX commands and parameters with examples.
Post-processing
Theory Manual
Physics and theory for nanoFluidX.
Validation Manual
Error and Warning Messages
This glossary contains generic messages generated by nanoFluidX, their likely causes, and possible methods to resolve the related issues.
Frequently Asked Questions
This section provides quick responses to typical and frequently asked questions regarding nanoFluidX.
Bibliography
References used throughout the nanoFluidX manual.

Material

In the drivetrain oiling solution, fluid material parameters can be defined either manually or by selecting from a wide range of pre-defined materials in the SimLab built-in material database.

Analysis > Material