Network parameters can be loaded from a predefined .wst file which is available for most of the common
wireless technologies.
For network planning, the air interface (for example, CDMA, OFDM), requires parameters to
be defined related to the carriers (number, bandwidth, separation), transmission modes,
coding, and the required signal-to-noise-and-interference ratio at the receiver. This
information may be loaded from a
.wst
file
1.
Tip: Find a list of predefined
.wst files in the
Altair installation directory, for
example:
Altair\2022.3\help\winprop\examples\ExampleGuide_models\Example-A07-Air_Interfaces_aka_Wireless_Standards.zip.