Evaluate

<Evaluate>
    <runname>Ftg_SN_Run_4</runname>
    <AnalysisLocation>ELEMENT</AnalysisLocation>
    <CurveExtrapolate>True</CurveExtrapolate>
    <HaighIntplMethod>Stress Ratio</HaighIntplMethod>
    <ScaleLifeDamage>
      <ScaleType>Damage</ScaleType>
      <ScaleValue>1.000000</ScaleValue>
    </ScaleLifeDamage>
    <StaticFailChk>Continue</StaticFailChk>
    <numprocessor>10</numprocessor>
    <DamageSummary Opt="CSV">
      <UserSetFile>E:/test/elem_list.csv</UserSetFile>
    </DamageSummary>
    <StsStnHis Opt="CSV">
      <UserSetFile>E:/test/elem_list.csv</UserSetFile>
    </StsStnHis>
    <CompLoadHis>Yes</CompLoadHis>
    <LayerOutputFlag>Yes</LayerOutputFlag>
    <numprocessor>10</numprocessor>
  </Evaluate>
Table 1. <Evaluate> Attributes
Element Tag Valid Values Comment
<runname> Run Name Mandatory
<AnalysisLocation> "ELEMENT"

"NODE"

 Entity selection for Fatigue evaluation
<CurveExtrapolate> “True”

“False”

 Controls the extrapolation of SN curves
<HaighIntplMethod> “Stress Ratio”

“Mean Stress”

 This option is applicable when multiple Haigh diagrams are defined and controls the interpolation of multiple Haigh diagrams
<StaticFailChk> “No Check”

“Continue”

“Stop”

 Controls Static Failure options for Stress Life
<safetyfactors> NA Optional Compound Element
<criterira> "Mean Stress"

"Stress Ratio"

 NA
<targetlife> Positive real value NA
<ScaleLifeDamage> NA Optional Compound Element
<ScaleType> "Life"

"Damage"
<ScaleValue> Positive real value Default = 1
<numprocessor> NA Number of processors to run
<DamageSummary Opt="None"> "None" NA
<DamageSummary Opt="CSV">

<UserSetFile>filepath</UserSetFile>

 "CSV" Outputs EventswiseDamage.csv for the element/node list assigned
<DamageSummary Opt="Set">

<Set name="set_name" entity_type="element"></Set>

 "Set" Outputs EventwiseDamage.csv for the element/node set assigned
<StsStnHis Opt="None"> "None" NA
<StsStnHis Opt="CSV">

<UserSetFile>filepath</UserSetFile>

 "CSV" Outputs Stress/Strain History per event for the element/node list assigned
<StsStnHis Opt="Set">

<Set name="set_name" entity_type="element"></Set>

 "Set" Outputs Stress/Strain History per event for the element/node set assigned
<CompLoadHis> "Yes"

"No"

 Output Compressed load history per event
Output all Layers "Yes"

"No"

 Contour results per Layer