Margin from Pin Land Pattern

Definition if the Pin Pad Size Input Type is Margin from Pin Land Pattern

1. Top Layer: Define the pad shape and size for the top layer.
   1. Pin Pad: Define the size and shape of the pin pad.
      • Pad Shape: Select pad shape from Circle, Rectangle, Oblong, or Rounded Rectangle.
      • Define size: Circle (diameter), Rectangle/Oblong (width and height), and Rounded Rectangle (width, height, and Rounded corner radius) respectively.

      
      
      Figure 2.

2. Solder Resist: Define the solder resist pad size using margin from the pad.
3. Unconnected pad: Define the unconnected pad shape and size.
   1. If unconnected pad is needed, select the checkbox.
   2. Define the pad shape and size.
4. Metal mask: Define the metal mask size using margin from the pad.