2022.3

Home
Tutorials
Start using Activate with our interactive tutorials.
Integration and Collaboration
Tutorials for integrating Activate models with other software products.

What's New
Get Started
Tutorials
User Guide
Reference Guides
Frequently Asked Questions

2022.3

What's New
Discover new features and enhancements.
Get Started
New to Activate? Learn the basics here.
Tutorials
Start using Activate with our interactive tutorials.
- Learning the Basics
  Discovery tutorials for building and simulating simple models.
- Modeling and Simulation
  Tutorials with modeling and simulation strategies for a variety of systems.
- Integration and Collaboration
  Tutorials for integrating Activate models with other software products.
  - Designing a Circuit with Spice Components
    Learn how to design a circuit with a Band Pass Filter using Spice components.
  - Introduction to Modeling with Spice
    Learn how to design a Band Pass Filter with components from the Spice block library and simulate the model with the Spice solver.
  - Simulating a Guitar Amplifier Signal
    Learn how to define a circuit block and run a transient and frequency-domain analysis for a guitar amplifier.
  - Introduction to Modeling with Arduino Boards
    Learn how to create a model and generate code that controls an LED light on an Arduino Uno board.
  - Co-Simulation with MotionSolve
    Learn how to build a Multi-Body System Model (MBS) of an inverted pendulum, combine it with a controls system model, and co-simulate the models.
  - FMU Import and Export
    Learn how to import the FMU (Functional Mock-up Unit) into your model for data exchange, and export the FMU for co-simulation.
  - Creating a Modelica Custom Component
    Learn the process of customizing a MoCustomComponent block to replace an existing Modelica Standard Library block in a model.
  - Co-Simulating an IPM Motor with Flux 2D
    Create an Activate model that supplies a three-phase sine current into a Flux 2D model of an Interior Permanent Magnet motor, and co-simulate the models.
  - Co-Simulating a Plunger Model with Flux 3D
    Create an Activate model to regulate by hysteresis a current that feeds into the coil of a 3D Flux model of a plunger, and co-simulate the models.
  - Co-Simulating an SPM Motor with Flux 2D
    Create an Activate model that supplies a three-phase bridge current into a Flux 2D model of a Surface Mounted Permanent Magnet (SPM) motor, and co-simulate the models.
  - Explore Three Coupling Methods with Flux
    Compare three coupling methods between Activate and Flux using co-simulation, lookup tables and FMUs.
  - Export an Embed Block from Activate
    Export generated code both for simulation and inclusion of generated code in Embed for target deployment purposes.
User Guide
Learn about the features and functionality available in Activate.
Reference Guides
Explore the Extended Definitions, OML Guides, Block Library, API Guide and Glossary.
Frequently Asked Questions
You've got questions? We've got answers!

View All Altair Simulation Help

2022.3

Home
Tutorials
Start using Activate with our interactive tutorials.
Integration and Collaboration
Tutorials for integrating Activate models with other software products.

What's New
Get Started
Tutorials
User Guide
Reference Guides
Frequently Asked Questions

Integration and Collaboration

Tutorials for integrating Activate models with other software products.

Attention: Available only with Activate commercial edition.

Tutorial: Designing a Circuit with Spice Components
Learn how to design a circuit with a Band Pass Filter using Spice components.
Tutorial: Introduction to Modeling with Spice
Learn how to design a Band Pass Filter with components from the Spice block library and simulate the model with the Spice solver.
Tutorial: Simulating a Guitar Amplifier Signal
Learn how to define a circuit block and run a transient and frequency-domain analysis for a guitar amplifier.
Tutorial: Introduction to Modeling with Arduino Boards
Learn how to create a model and generate code that controls an LED light on an Arduino Uno board.
Tutorial: Co-Simulation with MotionSolve
Learn how to build a Multi-Body System Model (MBS) of an inverted pendulum, combine it with a controls system model, and co-simulate the models.
Tutorial: FMU Import and Export
Learn how to import the FMU (Functional Mock-up Unit) into your model for data exchange, and export the FMU for co-simulation.
Tutorial: Creating a Modelica Custom Component
Learn the process of customizing a MoCustomComponent block to replace an existing Modelica Standard Library block in a model.
Tutorial: Co-Simulating an IPM Motor with Flux 2D
Create an Activate model that supplies a three-phase sine current into a Flux 2D model of an Interior Permanent Magnet motor, and co-simulate the models.
Tutorial: Co-Simulating a Plunger Model with Flux 3D
Create an Activate model to regulate by hysteresis a current that feeds into the coil of a 3D Flux model of a plunger, and co-simulate the models.
Tutorial: Co-Simulating an SPM Motor with Flux 2D
Create an Activate model that supplies a three-phase bridge current into a Flux 2D model of a Surface Mounted Permanent Magnet (SPM) motor, and co-simulate the models.
Tutorial: Explore Three Coupling Methods with Flux
Compare three coupling methods between Activate and Flux using co-simulation, lookup tables and FMUs.
Tutorial: Export an Embed Block from Activate
Export generated code both for simulation and inclusion of generated code in Embed for target deployment purposes.

© 2023 Altair Engineering, Inc. All Rights Reserved.

Intellectual Property Rights Notice | Technical Support | Cookie Consent