- Transmission Line Analysis
- Network Analysis
- Data Line Analysis
Analyze interconnect network of data byte group nets of DDR BUS in time domain to obtain the eye diagrams and transient waveforms which are different views of the signal delay and distortion.
- ADD/CMD/CTRL Line Analysis
Use ADD/CMD/CTRL Line Analysis to analyze interconnect network of command and control group nets of DDR BUS in time domain to obtain the eye diagrams and transient waveforms which are different views of the signal delay and distortion.
- Automatic DDR BUS Analysis
Automatic DDR Bus Analysis menu is used for automatically extracting all data strobe, data, clock, address, command, and control line nets of DDR memory interfaces (using Net Class File), automatically constructing data line, address line, command line, and control line analysis models, performing eye diagram analyses on all the models, and calculating the setup and hold timing margins of all data, address, command, and control line signals.
- Crosstalk Analysis
Crosstalk noise is the change in voltage and current caused on a signal line due to the signal switching of its neighborhood lines.
- Radiated Emission
Radiated Emission Analysis menu allows you to analyze interconnect network of individual nets current in time and frequency domain.
- IBIS-AMI Analysis
IBIS-AMI (Algorithmic Modeling Interface) is a methodology used for high-speed serial link design, analysis, and verification.
- SerDes Analysis
SerDes stands for Serializer/Deserializer, which is a technology used for converting parallel data into a serial stream and vice versa.
- MCP Analysis
Multi-Chip Package (MCP) is a semiconductor packaging technology that combines multiple chips into one package, which can save space and cost while improving functionality and performance.
