Example 6: Monostatic RCS of a Truck

This case explains how to compute the monostatic RCS of a truck changing the distance of the source.

Step 1

Start newFASANT and select GTD-PO.

Figure 1. Method type selection.

Step 2

Select the geometry to import by doing click on Geometry -> Import.

Figure 2. Import geometry.

Step 3

Click on Simulation -> Parameters to change the project parameters

Figure 3. Simulation parameters panel.

Step 4

Click on Source -> Parameters to modify the source parameters for this project

Figure 4. Source parameters panel.

Step 5

Click on Output -> Observation directions to define the parameters.

Figure 5. Observation parameters panel.

Step 6

Before running this example, create the project mesh by doing click on Meshing -> Create Mesh

Figure 6. Mesh result.

Step 7

Now we are going to proceed to simulate the project.

Click on Calculate -> Execute and choose the number of processors to use for the simulation. Then click on the Execute button and wait until it ends.

Step 8

Now you can see the results of the simulation by doing click on Show Results -> RCS -> View Cuts.

Figure 7. RCS results.