Example 2: Monostatic RCS of a Ship
This case explains how to calculate the monostatic RCS of an imported geometry.
Step 1
Start newFASANT.
Step 2
Select File and click on New.
Step 3
Select GTD-PO.
![](../../../../images/newfasant/image_new_project.png)
Step 4
Select the geometry to import.
![](../../../../images/newfasant/gtd_po/training_examples/import.png)
Step 5
Click on Simulation -> Parameters to change the project parameters.
![](../../../../images/newfasant/gtd_po/training_examples/15_2_GTD-PO_SimulationParameters.png)
Step 6
Click con RCS -> Parameters to set de RCS parameters of the project.
Step 7
Click on Source -> Parameters to modify the source parameters for this project.
![](../../../../images/newfasant/gtd_po/training_examples/source_2115.png)
Step 8
Introduce the observation information as follows:
![](../../../../images/newfasant/gtd_po/training_examples/observation.png)
Step 9
Before running this example, create the project mesh by doing click on Meshing -> Create Mesh.
![](../../../../images/newfasant/gtd_po/training_examples/15_2_GTD-PO_Mesh.png)
![](../../../../images/newfasant/gtd_po/training_examples/imag.png)
Step 10
Visualize the created mesh. To do this click on Meshing -> Visualize mesh.
Now you will be able to choose the generated mesh file.
Step 11
Now we are going to proceed to simulate the project.
Click on Calculate -> Execute and choose the number of processors to use for the simulation. Then click on the Execute button and wait until it ends.
![](../../../../images/newfasant/gtd_po/training_examples/simulation_log.png)
Step 12
Now you can see the results of the simulation by doing click on Show Results and selecting the desired results.
![](../../../../images/newfasant/gtd_po/training_examples/15_2_GTD-PO.png)