- EDEM 2000 Edinburgh Elasto-Plastic Adhesion (EEPA) Tablet Press
This tutorial describes the usage of the Edinburgh Elasto-Plastic Cohesion (EEPA) contact model through the simulation of a pharmaceutical tablet press.
- EDEM 2010 Tavares UFRJ Breakage SAG Mill
This tutorial decribes how to setup and analyze an EDEM simulation using the built-in Tavares UFRJ Breakage model.
- EDEM 2020 Linear Elastic Bonding Model Unconfined Compression
This tutorial describes additional options and models of EDEM, focusing on how to use the Linear Elastic Bonding Model (LEBM) with Volume Packing.
- EDEM 2400 Heat Transfer
This intermediate tutorial describes the usage of the Heat Transfer model, and is intended for users who have covered the introductory tutorials, as the initial set-up of the simulation is abbreviated and basic functionality is not explained in detail.
- EDEM 2500 Bonding V2
This tutorial describes the usage of the Bonding V2 model and focuses on the usage of Meta-Particles. It is intended for advanced users with a significant level of experience with EDEM.
- EDEM 2200 Electrostatics and Tribocharging Printer
This tutorial describes the usage of the Electrostatics and Tribocharging Printer model and is intended for users who have covered some, or all, of the introductory tutorials. It also explores additional options and models, focusing on the long-range electrostatic forces and tribocharging capabilities.