Access the Help Documentation
Now that you've installed the product, you will want to read the product-specific
documentation. Details about various ways to read the documentation is available in
the Use Help topic.
If you are reading this in the browser as HTML, you can navigate from this page to
the HTML version of the Administrator's manuals, for the products below.
Administrator's Manual for Monitor
Administrator's Manual for Accelerator
Administrator's Manual for Accelerator Plus
Administrator's Manual for Allocator
Administrator's Manual for FlowTracer
Full Bookshelf of All Manuals for All Products
Remove Downloaded Files
Now that the install of the downloaded files has been completed, you can remove the
downloaded and expanded files from the staging area.
The only benefit in leaving them on your disk is if you may need to update the
installation with additional platform-specific files.
An update of the existing release to add platform-specific is needed if you add a
machine type to your network that was not in place during this install process. In
that case, the downloaded and extracted common files will need to exist to do that
update. The platform-specific files that are now already installed will not be
needed during that add-platform update step. You can leave the common files on disk,
or delete them now and download them again when you need them.
Note: When the installation is being used for Accelerator Plus,
ensure that you do not have a local copy of the vovnc.tcl
file in the vovwxd directory. This would be the case if a
modification to that file was required to address a specific issue. Once the
upgrade completes, source the new version, and if the same modification is still
required, replace the existing vovnc.tcl from the current
VOVDIR and make the modification again. If no modification has been required,
remove the file from that directory so the default file will be used. Then start
the queue, and check the vovwxd status.
