Export Data

% vovproject enable vnc

vovdb_util: Usage Message
DESCRIPTION:
  Utilities for use with the VOV database.

USAGE:
  % vovdb_util <COMMAND> [COMMON OPTIONS] [OPTIONS]

COMMANDS:

  backup <dest>                   -- Backs up the VOV database to the specified
                                     destination. This command must be run on
                                     the same machine as the database.  If the
                                     destination exists it must be empty.
                                     The database must also be running.
  clearcfg [-noconfirm]           -- Resets the VOV database configuration to
                                     the initial, unconfigured state. Pass
                                     -noconfirm to skip confirmation.
  exportconfig <fileout>          -- Exports VOV database configuration
                                     properties DB_* to obfuscated file.
  exportpasswords <fileout>       -- Exports VOV database passwords
                                     from project to obfuscated file.
  help                            -- Shows help information.
  importconfig <filein>           -- Imports VOV database configuration
                                     properties DB_* from obfuscated file.
  importpasswords <filein>        -- Imports VOV database passwords
                                     from obfuscated file to project.
  configure [-v] [-reset] [-noconfirm] <host> <root> [<port>]
                                  -- Sets the host, root data path, and port for
                                     the VOV database. Pass -reset to overwrite
                                     existing settings. Pass -noconfirm to skip
                                     confirmation.
  showcfg                         -- Prints out current VOV database
                                     configuration.
  startdb                         -- Starts the VOV database.  Will restart a
                                     running database.
  status                          -- Prints current VOV database status.
  stopdb                          -- Stops the VOV database.
  upgrade [-noconfirm] [-sdb sourcedir] [-spgsw pg_software_dir]
                                  -- Upgrades the VOV database to use the newest
                                     version of the PostgreSQL engine.
                                     Options:
                                    -noconfirm to skip confirmation
                                    -sdb to specify path to Source database
                                    -spgsw path to older version of PG
                                     binaries compatible with Source database

    The following commands are only supported for Accelerator and Monitor.

  dump [-pre201509] [-start <YYYYMMDD>] [-end <YYYYMMDD>]
                                  -- Generate data files, optionally limited to
                                     the start and end times specified. Pass
                                     -pre201509 to dump the database that was
                                     used prior to 2015.09 (or beyond.)
  trim <YYYYMMDD>                 -- Deletes data prior to the given date.

COMMON OPTIONS:
  -v                              -- Increase verbosity.