Advice for use

Advice for use

  • The choice of diameters is possible over the range [1, 20000] mm.
  • The number of slots is possible over the range [3, 2400].
  • The number of poles is possible over the range [2, 400].
  • The number of bars (induction machines) is possible over the range [5, 500].

For more information, see the list of allowed combinations between the number of slots and the number of poles, synthesized in the section dedicated to winding.

Note: Our process for building and computations have been qualified over the following data ranges:

For Synchronous Machines with Permanent Magnets – Inner or Outer Rotor,

Or for Reluctance Synchronous Machines – Inner Rotor

  • Range for diameters [1, 1000] mm.
  • Range for number of slots [3, 90].
  • Range for number of poles [2, 80].

For Induction Machines with Squirrel Cage – Inner or Outer Rotor,

  • Range for diameters [1, 1000] mm.
  • Range for number of slots [3, 144].
  • Range for number of poles [2, 20].
  • Range for number of bars (induction machines) [5, 180].

Working beyond these limits is possible but accurate results are the responsibility of the user.