Does Inspire Support SpaceMouse?

Yes, Inspire PolyFoam supports 3Dconnexion's SpaceMouse.

No additional setup is required, but the device needs to be connected to your computer before Inspire PolyFoam is launched.

Inspire has supported SpaceMouse on Windows for many versions, but Linux was not officially supported until Inspire 2019.2. Also note that SpaceMouse it is not officially supported on virtual machines at this time.

Button Mappings to Inspire Functions

Inspire functions are mapped to the following buttons on Windows and Linux:

Windows	Linux	Inspire Function
Fit	Button 2	Fit the model to the view while keeping the current orientation.
Top View	Button 3	Switch to Top View, and fit the model to the view.
Left View	Button 4	Switch to Left View, and fit the model to the view.
Right View	Button 5	Switch to Right View, and fit the model to the view.
Front View	Button 6	Switch to Front View, and fit the model to the view.
Bottom View	Button 7	Switch to Bottom View, and fit the model to the view.
Back View	Button 8	Switch to Back View, and fit the model to the view.
Isometric View 1	Button 11	Switch to Isometric View, and fit the model to the view.
Isometric View 2	Button 12	Switch to Isometric View, and fit the model to the view.