Home
Model Setup
Designate casting parts, gravity direction, gates, and components.
Components
Identify predefined components, or create virtual components (cores, chillers, risers, sleeves, overflows, the mold, coolers, and filters).
Filter
A filter is a casting component applied to the gating system to catch impurities and to have flow control over the liquid as it passes through it.
Add/Edit Filter
Create and edit virtual filters in Inspire Cast.

Welcome
What's New
Discover new features and enhancements.
Get Started
New to Inspire Cast? Learn the basics here.
Tutorials
Learn to use Inspire Cast with our interactive tutorials.
Parametric Modeling
Create 2D sketches, surfaces, and solids with construction history and variables.
Model Setup
Designate casting parts, gravity direction, gates, and components.
- Cast Part
  Define the casting parts, filling system, and gravity direction.
- Gate
  Identify predesigned gates, or create and edit virtual gates.
- Components
  Identify predefined components, or create virtual components (cores, chillers, risers, sleeves, overflows, the mold, coolers, and filters).
  - Core
    A core is used to create the interior shape of a model. It is commonly used in sand casting, but it can also be used in other processes.
  - Chiller
    A chiller is used to accelerate the solidification in a specific area of a metal casting mold.
  - Riser
    A riser is a reservoir of material built into the mold to prevent porosity resulting from shrinkage.
  - Sleeve
    A sleeve is a sand component that is placed around a riser.
  - Overflow
    Overflows are cavities in the die that act as vents for air to escape and as traps for excess metal flow.
  - Squeeze Pin
    Squeeze pins can help prevent porosity in a finished part by compressing a particular region of the molten metal during its solidification.
  - Mold
    A mold contains the cast part and any casting components.
  - Cooler
    A cooling system is used in high-pressure die casting to provide heat dissipation and to maintain a constant temperature relative to the mold. This helps ensure tension-free cooling of the cast parts.
  - Filter
    A filter is a casting component applied to the gating system to catch impurities and to have flow control over the liquid as it passes through it.
    - Add/Edit Filter
      Create and edit virtual filters in Inspire Cast.
    - Designate Components as Filters
      Identify any filters you've already designed in a CAD tool.
  - Shot Sleeve
    In High Pressure Die Casting, a shot sleeve is a piston sleeve that advances the liquid in the chamber to the mold.
  - Crucible
    In Gravity Tilt Pour Casting, the crucible is the vessel in a vacillation machine that administers the liquid to the mold.
  - Stalk
    In Low Pressure Die Casting, a stalk is a riser tube through which molten material is forced into the mold.
Cast Analysis
Run a casting analysis to minimize defects and prevent manufacturing problems.
Casting Benchmark Manual
Download the Casting Benchmark Manual to learn more about benchmark and verification tests.

Add/Edit Filter

Create and edit virtual filters in Inspire Cast.

Click the Casting tab.
Click the Components icon.
Click the Add/Edit Filter icon.
Click any spot on the running system to create the filter.
The filter is created. The total number of filters is displayed above the Filter icon.
To edit the filter, use the microdialog options to define the type of filter and pore size, thickness, and side length.
Optional: To create more filters, repeat steps 4 and 5.
Right-click and mouse through the check mark to exit, or double-right-click.

Microdialog Options

Define the type and pore size, thickness, and size of the filter.


Option		Description
Type		Choose from cellular and foam and the respective pore size (cells per square inch for cellular and pores per inch for foam).
Thickness		Enter the thickness.
Size		Enter the side length.