Connector for HyperStudy
1. Overview
The aim of this export is to build a connector, allowing Altair® HyperStudy® to drive Altair® FluxMotor® for performing motor optimizations based on the computation processes embedded into FluxMotor®.
This can be done for an eligible test list by using input/output parameters defined in FluxMotor®.
Then, after having performing studies with HyperStudy® (Optimization or Design Of Experiment -DOE- for instance), the results can be visualized by selecting the resulting machine in the “Motor Catalog”.
2. Area to build a connector
 |
|
| Motor Factory – EXPORT AREA – Export connector for HyperStudy® | |
| 1 | Selection of the EXPORT area of Motor Factory. |
| 2 | Access the area in which a connector for HyperStudy® can be made |
| 3 | Zone to visualize either the overview of the selected test or the corresponding user input/output parameters |
| 4 | 4 steps to build the connector to be exported for HyperStudy® |
| 5 | Buttons to validate inputs, display a preview and export the built connector for HyperStudy® |
3. Steps to build and export a connector
In EXPORT / ADVANCED TOOLS / HYPERSTUDY area, 4 steps are needed to build and export a report:
- Select the test which will be performed by HyperStudy®
- Define the test configuration, that means the user inputs/outputs parameters needed to define the test (settings and user inputs of the considered test)
- Select the inputs/outputs parameters for performing studies with HyperStudy®
- Define the export information