Edit Physics Workflow

Fit experimental data to material models and validate behavior.

Hyperelastic Characterization Workflow

Page Layout

  • Left: List of test curves

  • Center: Plot window

  • Right: Model settings and results

File Management

  • Use Import Data to add tension, compression, or shear data.
  • For format requirements refer to Add Data

Make Curves Available for Fitting

  1. Right-click on test curves.
  2. Select Enable for Fitting.

Select Curves for Fitting

  • Use check boxes to include curves in the fitting algorithm.
  • Visual feedback updates the plot.

Select Models for Fitting

  • Use the model drop-down in the right panel.
  • Upon selection, parameter fields populate.
    • Information Button: Click the i️ icon next to a model header line to view its formula and description.
    • Setting Parameter Limits: Use sliders/input fields to define upper and lower bounds.
    • Refitting Parameters: Click Refit after modifying limits or curve selection.
    • Resetting Parameters: Use the Reset button to restore original parameters.

Fitting the Data & Reviewing Results

  • Select Test Types: Choose which data types (e.g., tension, shear) are plotted.
  • Select Models: Switch models and compare fit results visually and numerically.
  • Edit Parameter Values: Use manual overrides for fine-tuning; save and re-fit if needed.

Save State

Click Save State to record current model configuration

Publish Results (Approving Results)

Use Publish to validate and apply the fitted model to the material.