Add Workflow

Set up model workflows to evaluate physical behavior.

Add Objective Workflow

  1. Under the material, click + Add Workflow.
  2. Choose Objective Workflow.
  3. Enter a Name based on the test scope.
  4. Select applicable test types from the list (e.g., tension, shear).

Specifying the Physics Workflow

  1. Navigate to the Physics Workflow tab.
  2. Select a predefined template (e.g., Hyperelastic, Viscosity).
  3. Review the preconfigured stages.

Models Available

The current Physics Workflow is "Quasi-Static" and the only material type available is Hyperelastic. The models available include :
  • NeoHookean: Models shear-thinning behavior at constant temperature.
  • Mooney-Rivlin: Mooney-Rivlin can have 2, 5, or 9 parameters..
  • Arruda-Boyce:
  • Gent:
  • Signorini:
  • Yeoh:
  • Ogden (Type 1, N=2 to N=6):
  • Ogden (Type 2, N=2 to N=6):