Creating an Injection Point
-
From the Resin Transfer Molding ribbon,
Process Data tools, click the Injection Point tool.
- Select a surface on the model to create an injection point.
- In the microdialog that appears, enter the injection parameters.
-
To create additional injection points, select additional surfaces and specify
the parameters for each.
Note: In models that have multiple inlets, some of the changes made to one injection point are synchronized across all injection points.These include
- whether heat transfer is enabled
- whether curing is enabled
- curing kinetics data
- Right-click and mouse through the check mark to exit, or double-right-click.