Home
Inspire Extrude Polymer
Get started with Inspire Extrude Polymer.
Reference
Find information about material data blocks in GRF files.
Material Models
HyperXtrude associates each component with a material. Each material is defined inside the material data block in the GRF file.
Tool Material Properties
The Tool material type is similar to the Solid material type and is a parameter used with the BEGIN MATERIAL data block. This material must be used when solving conjugate heat transfer problems. For Tool, HyperXtrude allows you to specify the conductivity in the form of diagonal tensor.

Welcome
What's New
Discover new features and enhancements.
Get Started
New to Inspire Extrude? Learn the basics here.
Training
Explore Altair's resources for training and support.
Inspire Extrude Metal
Get started with Inspire Extrude Metal.
Inspire Extrude Polymer
Get started with Inspire Extrude Polymer.
- What is Inspire Extrude Polymer?
  Inspire Extrude Polymer offers an analysis tool for virtual testing, validation, correction and optimization of extrusion die designs.
- FAQs
  Find answers to Frequently Asked Questions from our users.
- Extrusion Analysis
  Setup and perform an Extrusion analysis.
- Tool Deflection Analysis
  Setup and perform a Tool Deflection analysis.
- Calibration Analysis
  Setup and perform a Calibration analysis.
- Reference
  Find information about material data blocks in GRF files.
  - Material Models
    HyperXtrude associates each component with a material. Each material is defined inside the material data block in the GRF file.
    - Assign Material properties
      This block of information is for assigning the material properties to each element MATID.This block also enables you to identify different regions of the mesh with a unique name so as to use it for post-processing or mesh adaptation. A single MATERIAL can be assigned to more than one MATID.
    - Fluid Material Properties
      The Fluid material type is a parameter used with the BEGIN MATERIAL data block.
    - Workpiece Material Properties
      The Workpiece material is used to describe the extrudate in metal extrusion. Typically, this material is applied to the components in the mesh that describe the negative volume created by the tool (such as, billet, pockets, feeder cavity, welding chamber, porthole etc.) Inside the user profile, we assign this material even to the boundary faces of the workpiece components. HyperXtrude supports the following constitutive models for metals:
    - Polymer Material Properties
      HyperXtrude supports six different models to describe the constitutive behavior of polymers. The material models available in HyperXtrude are:
    - Solid Material Properties
      The Solid material type is a parameter used with the BEGIN MATERIAL data block. This material must be used when solving conjugate heat transfer problems.
    - Tool Material Properties
      The Tool material type is similar to the Solid material type and is a parameter used with the BEGIN MATERIAL data block. This material must be used when solving conjugate heat transfer problems. For Tool, HyperXtrude allows you to specify the conductivity in the form of diagonal tensor.
- Tutorials
  Start using Inspire Extrude with our interactive tutorials.
Inspire Friction Stir Welding
Get started with Inspire Friction Stir Welding.
Inspire Resin Transfer Molding
Get started with Inspire Resin Transfer Molding.
Parametric Modeling
Create 2D sketches, surfaces, and solids.

Tool Material Properties

The Tool material type is similar to the Solid material type and is a parameter used with the BEGIN MATERIAL data block. This material must be used when solving conjugate heat transfer problems. For Tool, HyperXtrude allows you to specify the conductivity in the form of diagonal tensor.

Syntax


Tool	Steel	{
	Density =	p
	SpecificHeat =	Cp (T)
	XConductivity =	K (T)
	YConductivity =	K (T)
	ZConductivity =	K (T)
	VolumetricHeatSource =	Qvol
	CoeffOfThermalExpansion =	β
	YoungModulus =	E
	PoissonRation =	ν }


Density	Real (Constant)	Density of tool material
SpecificHeat	Real (Constant/Function of Temp.)	Function can be a TABLE1 or EXPRESSION
XConductivity	Real (Constant/Function of Temp.)	Function can be a TABLE1 or EXPRESSION
ZConductivity	Real (Constant/Function of Temp.)	Function can be a TABLE1 or Expression
VolumetricHeatSource	Real (Constant)	Value per unit volume.
CoeffOfThermalExpansion	Real(Constant)	Coefficient of thermal expansion.
YoungModulus	Real (Constant/Function of Temp.)	Young's modulus of tool material
PoissonRatio	Real(Constant)	Poisson ratio of tool material