Defines and constants

Detailed Description

Network planning interface defines. These are used to set/retrieve various parameters of network planning through the functions WinProp_Net_Project_Para_Set and WinProp_Net_Project_Para_Get.

Generic air interfaces

NET_AIRINTERFACE_GSM_GENERIC 0x0000

Generic GSM standard air interface.

NET_AIRINTERFACE_TETRA_GENERIC 0x0020

Generic TETRA standard air interface.

NET_AIRINTERFACE_802_11_A_GENERIC 0x0040

Generic IEEE 802.11a standard air interface.

NET_AIRINTERFACE_802_11_G_GENERIC 0x0080

Generic IEEE 802.11g standard air interface.

NET_AIRINTERFACE_802_11_N_GENERIC 0x00A0

Generic IEEE 802.11n standard air interface.

NET_AIRINTERFACE_802_11_P_GENERIC 0x00C0

Generic IEEE 802.11p standard air interface.

NET_AIRINTERFACE_802_16_2004_GENERIC 0x00E0

Generic IEEE 802.16-2004 standard air interface.

NET_AIRINTERFACE_802_16_E_GENERIC 0x0100

Generic IEEE 802.16e standard air interface.

NET_AIRINTERFACE_LTE_GENERIC 0x0140

Generic LTE standard air interface.

NET_AIRINTERFACE_CDMA_GENERIC 0x0170

Generic CDMA standard air interface.

NET_AIRINTERFACE_5G_FDD_GENERIC 0x0180

Generic 5G-FDD standard air interface.

NET_AIRINTERFACE_5G_TDD_GENERIC 0x0190

Generic 5G-TDD standard air interface.

Common parameters for different air interfaces

NET_PARA_PREDEFINED_AIRINTERFACE -4

Set predefined Air Interface.

NET_PARA_MULTIPLE_ACCESS -1

Multiple Access Mode.

NET_PARA_DUPLEX_MODE -2

Duplex Mode.

NET_PARA_DUPLEX_SUBMODE -3

Duplex Sub Mode.

NET_PARA_BANDWIDTH 0

Bandwidth for LTE.

NET_PARA_CARRIER_SEPARATION 1

Separation between carriers.

NET_PARA_DL_UL_SEPARATION 4

Separation between UL and DL.

NET_PARA_ADJCPR 5

NET_PARA_ALTCPR 6

NET_PARA_ALLCPR 7

NET_PARA_TIMESLOTS 8

Number of time slots.

NET_PARA_TIMESLOTS_PER_USER 9

Number of time slots per user.

NET_PARA_CHIPRATE 10

Chip rate.

NET_PARA_ORTHOGONALITY_DL 11

Orthogonality factor (Downlink).

NET_PARA_COMMON_CHANNEL_POWER 12

NET_PARA_CARRIERS 13

Number of carriers.

NET_PARA_MS_BODYLOSS 14

Damping losses by the body of the user.

NET_PARA_MS_GAIN 15

Mobile station antenna gain.

NET_PARA_TIMESLOTS_FURTHER 16

Number of further time slots.

NET_PARA_MS_NOISEFIGURE 17

Noise Figure Mobile Station.

NET_PARA_MS_FAST_FADING_MARGIN 18

Fast Fading Margin.

NET_PARA_MS_MAX_TX_POWER 19

Power Mobile Station (dBm).

NET_PARA_MS_POWER_CONTROL_RANGE 120

Power control range from the maximum mobile station power (dB).

NET_PARA_SERVICES 20

Number of services.

NET_PARA_RESOLUTION 21

Resolution of result matrix.

NET_PARA_AREA_MODE 22

Size of planning area: Automatic mode. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_AREA_LL_X 23

X-coordinate of lower left corner of predicton area. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_AREA_LL_Y 24

Y-coordinate of lower left corner of predicton area. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_AREA_UR_X 25

X-coordinate of upper right corner of predicton area. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_AREA_UR_Y 26

Y-coordinate of upper right corner of predicton area. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_CHANNELS 29

Number of channels.

NET_PARA_FFT_SIZE 30

FTT Size in LTE air interface. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_SUBCARRIERS_RESOURCE_BLOCK 32

Number of subcarriers for one resource block in LTE air interface. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_CELL_ASSIGNMENT_MIN_REQ_SNIR 36

Minimum required SNIR for cell assignment. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_CELL_ASSIGNMENT_MIN_REQ_POWER 37

Minimum required power for cell assignment. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_CELL_ASSIGNMENT_SPREADING_FACTOR 38

Spreading factor for cell assignment. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_CELL_ASSIGNMENT_MIN_REQ_POWER_USED 39

Minimum required power used for Cell Assignment. Used in the WinProp_Net_Project_Para_Set function.

NET_PARA_HEIGHT 40

Prediction height.

NET_PARA_ORTHOGONALITY 41

Orthogonality factor.

NET_PARA_GUARD_PERIOD 45

Guard Period.

NET_PARA_PROJECTNAME 46

Name of project. Can be optionally set in WinProp_Net_Project_Para_Set.

NET_PARA_TDD_VARIABLE_SWITCH 47

TDD Variable Switch.

NET_PARA_CELL_LOAD 48

Cell Load.

NET_PARA_CELL_ASSIGNMENT_BACKOFF 50

Backoff value for cell assignment.

Parameters for OFDM

NET_PARA_SAMPLING_RATE_FACTOR 51

Sampling rate. Used in the WinProp_Net_Project_Para_Set.

NET_PARA_SUBCARRIERS_GUARD 52

Sub-carrier guards.

NET_PARA_SUBCARRIERS_DC 53

DC sub-carrier.

NET_PARA_SYMBOLS_MODE 54

Symbol definition.

NET_PARA_SUBCARRIERS_CONTROL 55

Sub-carriers for control. Used in the WinProp_Net_Project_Para_Set to set the number of control sub-carriers.

NET_PARA_SUBCARRIERS_REFERENCE 56

Reference sub-carriers. Used in the WinProp_Net_Project_Para_Set to set the number of reference sub-carriers.

NET_PARA_SYMBOLS_CONTROL 57

Control symbols. Used in the WinProp_Net_Project_Para_Set to set control symbols.

NET_PARA_SYMBOLS_REFERENCE 58

Reference symbols. Used in the WinProp_Net_Project_Para_Set to set reference symbols.

NET_PARA_CELL_LOAD_MODE 59

Cell Load Mode.

NET_PARA_HEIGHT_MULTIPLE 60

Set multiple prediction heights.

NET_PARA_ASCII_OUTPUT 61

Set additional ASCII output.

NET_PARA_BANDWIDTH_MODE_5G 62

Set Bandwidth mode. Only relevant for 5G projects.

NET_PARA_INTERFERANCE_OVERLAP_RATIO 63

Set Interference overlap ratio.

NET_PARA_POWER_BACKOFF_CONTROL 64

Set Tx power backoff of control subcarriers.

NET_PARA_SAME_PILOT_SUBCARRIERS 65

Use in each cell same subcarriers for pilot signals. Relevant if symbol mode is set to identical subcarriers for each symbol.

NET_PARA_GUARD_SYNCHRONIZATION 144

Guard interval synchronization (trigger on first or strongest contribution).

NET_OFDM_GUARD_SYNC_FIRST 0

Guard interval is synchronized to trigger on first contribution.

NET_OFDM_GUARD_SYNC_STRONGEST 1

Guard interval is synchronized to trigger on strongest contribution.

Parameters for MIMO systems (LTE, 802.11n)

NET_PARA_MIMO_NUMBER_STREAMS 70

Number of MIMO streams.

NET_PARA_MIMO_SIGNALLING_OVERHEAD 71

MIMO: Overhead ratio.

NET_PARA_MIMO_BEAMFORMING_GAIN_SERVING 72

MIMO: Beamforming serving signal.

NET_PARA_MIMO_BEAMFORMING_GAIN_INTERFERENCE 73

MIMO: Beamforming interfering signal.

NET_PARA_MIMO_INTERFERENCE_MODE 74

MIMO: Interference mode.

NET_PARA_MIMO_INTERFERENCE_RATIO 75

MIMO: Interference ratio.

NET_PARA_MIMO_INTERFERENCE_POL_MODE 76

MIMO: Interference polarization mode.

NET_PARA_MIMO_INTERFERENCE_POL_ALL_LOS_SAME 77

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_ALL_LOS_DIFF 78

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_SIGNAL_LOS_SAME 79

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_SIGNAL_LOS_DIFF 80

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_SIGNAL_NLOS_SAME 81

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_SIGNAL_NLOS_DIFF 82

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_ALL_NLOS_SAME 83

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_POL_ALL_NLOS_DIFF 84

MIMO: Interference parameter.

NET_PARA_MIMO_INTERFERENCE_ANGLE_DEPENDANCY 85

MIMO: Interference parameter.

General Parameters

NET_PARA_OUTPUT_WINPROP 86

Set paths for additional output in WinProp file format.

NET_PARA_CELL_ASSIGNMENT_MODE 87

Set cell assignment mode.

NET_PARA_CELL_ASSIGNMENT_SIGNALS 88

Set cell assignment signals.

NET_PARA_TDD_TIME_DL 90

TDD Time DL (downlink).

NET_PARA_TDD_TIME_UL 91

TDD Time UL (uplink).

NET_PARA_TDD_TIME_SWITCH 92

TDD switch.

NET_PARA_TDD_NBR_DL 93

TDD Number DL (downlink).

NET_PARA_TDD_NBR_UL 94

TDD Number UL (uplink).

NET_PARA_TDD_NBR_SWITCH 95

TDD Number Switch.

NET_PARA_TDD_SWITCH_DL 96

TDD Number Switch DL (downlink).

NET_PARA_TDD_SWITCH_UL 97

TDD Number Switch UL (downlink).

NET_PARA_TDD_SWITCH_GP 98

TDD Switch Ratio GP.

NET_PARA_GUARD_TIME 99

Guard time.

NET_MAX_USERS_PER_CARRIER 100

Maximum number of users per carrier.

NET_WINDOW_SOFT_HANDOVER 101

Soft Handover Window.

NET_WINDOW_SOFTER_HANDOVER 102

Softer Handover Window.

NET_PARA_TRAFFIC_MODE 103

Monte carlo traffic mode.

NET_PARA_APPLICATION_AREA_MODE 104

Prediction area units (Kilometres = NET_APPLICATION_AREA_MODE_KILOMETER / metres = NET_APPLICATION_AREA_MODE_METER

NET_PARA_TRAFFIC_MONTE_CARLO_LOOPS 105

Number of Monte Carlo runs.

NET_PARA_TRAFFIC_MONTE_CARLO_DRAW 106

Monte carlo parameter. The fourth parameter of WinProp_Net_Project_Para_Set can be either 1 or 0.

NET_PARA_SIMULATE_EACH_CARRIER 107

Decision variable to simulate all carriers. The fourth parameter of WinProp_Net_Project_Para_Set can be either 1 or 0.

NET_PARA_TRAFFIC_CELL_SELECT_CONSIDER_PRIO 108

Decision variable to consider priority of an application in a cell. The fourth parameter of WinProp_Net_Project_Para_Set can be set to 1 or 0.

NET_PARA_TRAFFIC_CELL_SELECT_UPDATE_LIST 109

Update cell list with new value. The fourth parameter of WinProp_Net_Project_Para_Set can be set to NET_CELL_SELECT_UPDATE_NEW_PATH_LOSSES or NET_CELL_SELECT_UPDATE_NEW_LOAD_VALUE.

NET_PARA_TRAFFIC_CELL_SELECT_ALGORITHM 110

Select user algorithm.

NET_PARA_HEIGHT_ADD 111

Add prediction height.

NET_PARA_TDMA_GUARD_INTERVAL 112

TDMA guard interval between time slots.

NET_PARA_CELL_NOISE_RISE 113

Set noise rise in uplink due to other interfering mobile stations.

NET_PARA_SYMBOLS_DATA 114

Set number of data symbols (time).

NET_PARA_TRAFFIC_MAX_ITERATIONS 115

Set Max number of iterations for traffic simulations.

NET_PARA_TRAFFIC_CELL_LOAD_THRESHOLD 116

Set threshold for changes of cell.

NET_PARA_REPRO_NUMBER 117

Initialisation of random processes.

NET_SETTINGS_NUMBER_THREADS 118

NET_SETTINGS_SAVE_FILTER 119

NET_PARA_REPEATERS_MULTIHOPS 145

Set number of repeaters multihops.

NET_PARA_REPEATERS_MIN_POWER 146

Set minimum required received power at a repeater to consider it in network planning.

NET_PARA_POWER_SUPERPOSITION 147

Set minimum required received power at a repeater to consider it in network planning.

NET_PARA_ANTENNA_MASKING_MODE 121

Activate/deactivate antenna masking for network planning results (propagation results with omni-pattern).

NET_PARA_EMC_DATABASE 122

Set filename of the EMC specifications database for EMC/EMF Analysis.

NET_PARA_COMPONENTS_DATABASE 143

Save components catalogue database name.

Parameters for Time-Variant network projects

NET_PARA_TIME_VARIANT_MODE 123

Set time-variant mode: 0 = Stationary simulation, 1 = Time-variant simulation with time interval, and 2 = Time-variant simulation with arbitrary time steps.

NET_PARA_TIME_VARIANT_START 124

Set start time (s). Only relevant Time-variant simulation with time interval mode.

NET_PARA_TIME_VARIANT_END 125

Set end time (s). Only relevant Time-variant simulation with time interval mode.

NET_PARA_TIME_VARIANT_INTERVAL 126

Set interval time between two time steps time (s). Only relevant Time-variant simulation with time interval mode.

NET_PARA_TIME_VARIANT_ADD_STEP 127

Add an arbitrary time step. Only relevant Time-variant simulation with arbitrary time steps.

Parameters for polarization-dependent co-channel interference that depends on the polarization and on the LOS/NLOS situation.

NET_PARA_POL_INTERFERENCE_MODE 130

Set polarization-dependent interference mode: 0 = disabled, 2 = enabled.

NET_PARA_POL_INTERFERENCE_SAME_POL_LOS_LOS 131

Set interference ratio If transmitting antennas have the same polarization, and transmitters (server, interferer) have LOS.

NET_PARA_POL_INTERFERENCE_SAME_POL_LOS_NLOS 132

Set interference ratio If transmitting antennas have the same polarization, one transmitters has LOS, and the other transmitter has NLOS.

NET_PARA_POL_INTERFERENCE_SAME_POL_NLOS_NLOS 133

Set interference ratio If transmitting antennas have the same polarization, and transmitters (server, interferer) have NLOS.

NET_PARA_POL_INTERFERENCE_SAME_POL_UNKOWN_LOS 134

Set interference ratio If transmitting antennas have the same polarization, and LOS state for the transmitters is unknown.

NET_PARA_POL_INTERFERENCE_DIFF_POL_LOS_LOS 135

Set interference ratio If transmitting antennas have different polarizations, and transmitters (server, interferer) have LOS.

NET_PARA_POL_INTERFERENCE_DIFF_POL_LOS_NLOS 136

Set interference ratio If transmitting antennas have different polarizations, one transmitters has LOS, and the other transmitter has NLOS.

NET_PARA_POL_INTERFERENCE_DIFF_POL_NLOS_NLOS 137

Set interference ratio If transmitting antennas have different polarizations, and transmitters (server, interferer) have NLOS.

NET_PARA_POL_INTERFERENCE_DIFF_POL_UNKOWN_LOS 138

Set interference ratio If transmitting antennas have different polarizations, and LOS state for the transmitters is unknown.

NET_PARA_POL_INTERFERENCE_ORTH_POL_LOS_LOS 139

Set interference ratio If transmitting antennas have orthogonal polarizations, and transmitters (server, interferer) have LOS.

NET_PARA_POL_INTERFERENCE_ORTH_POL_LOS_NLOS 140

Set interference ratio If transmitting antennas have orthogonal polarizations, one transmitters has LOS, and the other transmitter has NLOS.

NET_PARA_POL_INTERFERENCE_ORTH_POL_NLOS_NLOS 141

Set interference ratio If transmitting antennas have orthogonal polarizations, and transmitters (server, interferer) have NLOS.

NET_PARA_POL_INTERFERENCE_ORTH_POL_UNKOWN_LOS 142

Set interference ratio If transmitting antennas have orthogonal polarizations, and LOS state for the transmitters is unknown.

Parameters to consider handover for cell assignment.

NET_PARA_HANDOVER_CELL_ASSIGNMENT 148

Set handover for cell assignment: 0 = disabled, 1 = enabled.

NET_PARA_HANDOVER_OFFSET_DB 149

Set handover offset in dB.

NET_PARA_HANDOVER_TTT_MS 150

Set handover TTT (time to trigger) in ms.

Optimizer parameters.

NET_OPT_ACTIVATE 1000

Use optimiser.

NET_OPT_PRIO_MAX 1001

Set priority.

NET_OPT_USE_PRIO_MAP 1011

Use priority map.

NET_OPT_COMBINATION_SENSITIVITY 1013

Use sensitivity combination.

NET_OPT_SELECTION_SENSITIVITY 1014

Select site sensitivity.

NET_OPT_REC_POWER_MIN 1015

Minimum received power setting (must not be used).

NET_OPT_SNIR_MIN 1016

Minimum SNIR (must not be used).

Cell Traffic setting

NET_TRAFFIC_MODE_STATIC_HOMOGENEOUS 0

homogeneous traffic per cell.

NET_TRAFFIC_MODE_STATIC_LOCATION_DEP 1

Location dependent traffic.

NET_TRAFFIC_MODE_STATIC_MONTE_CARLO 2

Monte-Carlo simulation.

NET_APPLICATION_AREA_MODE_METER 0

Application users distributed per square meter.

NET_APPLICATION_AREA_MODE_KILOMETER 1

Application users distributed per square kilometer.

NET_APPLICATION_TRAFFIC_MODE_ARRIVAL_RATE 0

Application users distributed per square meter.

NET_APPLICATION_TRAFFIC_MODE_OFFERED_TRAFFIC 1

Application users distributed per square kilometer.

Network application settings

NET_PARA_APPLICATION_NAME 0

Set network planning application name.

NET_PARA_APPLICATION_ID 1

Set network planning application ID.

NET_PARA_APPLICATION_PRIORITY 2

Set network planning application priority.

NET_PARA_APPLICATION_ACTIVITY 3

Set network planning application activity.

NET_PARA_APPLICATION_TRAFFIC_MODE 4

Set network planning application traffic mode.

NET_CELL_SELECT_UPDATE_NEW_PATH_LOSSES 0

Update cell list with new path loss.

NET_CELL_SELECT_UPDATE_NEW_LOAD_VALUE 1

Update cell list with new load value.

Parameters for carriers.

NET_PARA_CARRIER_INDEX 0

Set carrier index.

NET_PARA_CARRIER_FREQ_UL 1

Set carrier uplink frequency.

NET_PARA_CARRIER_FREQ_DL 2

Set carrier downlink frequency.

NET_PARA_CARRIER_NB_IN_GROUP 3

Set number of carriers used in a group of carrires. Only relevant if carrier represents a group of carriers.

NET_PARA_CARRIER_INDEX_IN_GROUP 4

Set carriers' indexes used in a group of carrires. Only relevant if carrier represents a group of carriers.

Parameters for transmission modes / services. These are set using the function WinProp_Net_TransmissionMode_Para_Set.

NET_PARA_TRANS_MODE_NAME 0

Set the name of the transmit mode.

NET_PARA_TRANS_MODE_BITRATE_UL 1

Set the transmit mode's uplink bit rate.

NET_PARA_TRANS_MODE_BITRATE_DL 2

Set the transmit mode's downlink bit rate.

NET_PARA_TRANS_MODE_MIN_POWER_UL 3

Set the minimum transmit mode uplink power.

NET_PARA_TRANS_MODE_MIN_POWER_DL 4

Set the minimum transmit mode downlink power.

NET_PARA_TRANS_MODE_SNIR_UL 5

Set the transmit mode's uplink SNIR.

NET_PARA_TRANS_MODE_SNIR_DL 6

Set the transmit mode's dwonlink SNIR.

NET_PARA_TRANS_MODE_POWER_BACKOFF_UL 7

Set uplink power backoff.

NET_PARA_TRANS_MODE_POWER_BACKOFF_DL 8

Set downlink power backoff.

NET_PARA_TRANS_MODE_ACTIVITIY_UL 9

Set uplink activity.

NET_PARA_TRANS_MODE_ACTIVITIY_DL 10

Set downlink activity.

NET_PARA_TRANS_MODE_MAX_POWER_UL 11

Set maximum allowed uplink power.

NET_PARA_TRANS_MODE_MAX_POWER_DL 12

Set maximum allowed downlink power.

NET_PARA_TRANS_MODE_MIN_POWER_UL_USED 13

Set minimum required uplink power.

NET_PARA_TRANS_MODE_MIN_POWER_DL_USED 14

Set minimum required downlink power.

NET_PARA_TRANS_MODE_TIMESLOTS_UL 15

Set the number of timeslots (uplink).

NET_PARA_TRANS_MODE_TIMESLOTS_DL 16

Set the number of timeslots (downlink).

NET_PARA_TRANS_MODE_SPREADING_FACTOR_UL 17

Set the transmit mode spreading factor (uplink).

NET_PARA_TRANS_MODE_SPREADING_FACTOR_DL 18

Set the transmit mode spreading factor (downlink).

NET_PARA_TRANS_MODE_MODULATION_UL 19

Set modulation scheme (uplink).

NET_PARA_TRANS_MODE_MODULATION_DL 20

Set modulation scheme (downlink).

NET_PARA_TRANS_MODE_CODERATE_K_UL 21

Set code rate (uplink).

NET_PARA_TRANS_MODE_CODERATE_N_UL 22

Set code rate (uplink).

NET_PARA_TRANS_MODE_CODERATE_K_DL 23

Set code rate (downlink).

NET_PARA_TRANS_MODE_CODERATE_N_DL 24

Set code rate (downlink).

NET_PARA_TRANS_MODE_RESOURCE_BLOCKS_UL 25

Set number of resource blocks (uplink).

NET_PARA_TRANS_MODE_RESOURCE_BLOCKS_DL 26

Set number of resource blocks (downlink).

NET_PARA_TRANS_MODE_OVERHEAD_RATIO_UL 27

Set overhead ratio (uplink).

NET_PARA_TRANS_MODE_OVERHEAD_RATIO_DL 28

Set overhead ratio (downlink).

NET_PARA_TRANS_MODE_NBR_PARALLEL_CODES_UL 29

Set parallel used codes (uplink).

NET_PARA_TRANS_MODE_NBR_PARALLEL_CODES_DL 30

Set parallel used codes (downlink).

NET_PARA_TRANS_MODE_DIRECTION 31

Set transmission mode direction. Only uplink/downlink or bi-directional.

NET_PARA_TRANS_MODE_POSITION 32

Set position.

NET_PARA_5G_NUMEROLOGY0_5MHZ_FR1 0x01

5 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_5MHZ_FR1 0x11

5 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_10MHZ_FR1 0x02

10 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_10MHZ_FR1 0x12

10 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_10MHZ_FR1 0x22

10 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_15MHZ_FR1 0x03

15 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_15MHZ_FR1 0x13

15 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_15MHZ_FR1 0x23

15 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_20MHZ_FR1 0x04

20 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_20MHZ_FR1 0x14

20 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_20MHZ_FR1 0x24

20 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_25MHZ_FR1 0x05

25 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_25MHZ_FR1 0x15

25 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_25MHZ_FR1 0x25

25 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_30MHZ_FR1 0x06

30 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_30MHZ_FR1 0x16

30 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_30MHZ_FR1 0x26

30 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_40MHZ_FR1 0x07

40 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_40MHZ_FR1 0x17

40 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_40MHZ_FR1 0x27

40 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY0_50MHZ_FR1 0x08

50 MHz bandwidth, numerology 0 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_50MHZ_FR1 0x18

50 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_50MHZ_FR1 0x28

50 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_60MHZ_FR1 0x19

60 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_60MHZ_FR1 0x29

60 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_70MHZ_FR1 0x1A

70 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_70MHZ_FR1 0x2A

70 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_80MHZ_FR1 0x1B

80 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_80MHZ_FR1 0x2B

80 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_90MHZ_FR1 0x1C

90 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_90MHZ_FR1 0x2C

90 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY1_100MHZ_FR1 0x1D

100 MHz bandwidth, numerology 1 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_100MHZ_FR1 0x2D

100 MHz bandwidth, numerology 2 in frequency range 1.

NET_PARA_5G_NUMEROLOGY2_50MHZ_FR2 0xA8

50 MHz bandwidth, numerology 2 in frequency range 2.

NET_PARA_5G_NUMEROLOGY3_50MHZ_FR2 0xB8

50 MHz bandwidth, numerology 3 in frequency range 2.

NET_PARA_5G_NUMEROLOGY2_100MHZ_FR2 0xAD

100 MHz bandwidth, numerology 2 in frequency range 2.

NET_PARA_5G_NUMEROLOGY3_100MHZ_FR2 0xBD

100 MHz bandwidth, numerology 3 in frequency range 2.

NET_PARA_5G_NUMEROLOGY2_200MHZ_FR2 0xAE

200 MHz bandwidth, numerology 2 in frequency range 2.

NET_PARA_5G_NUMEROLOGY3_200MHZ_FR2 0xBE

200 MHz bandwidth, numerology 3 in frequency range 2.

NET_PARA_5G_NUMEROLOGY3_400MHZ_FR2 0xBF

400 MHz bandwidth, numerology 3 in frequency range 2.

Other defines

NET_PARA_CHANNEL_NAME 0

NET_PARA_CHANNEL_SPREADING_FACTOR 1

NET_PARA_CHANNEL_MIN_C_TO_I 2

Error codes for network planning.

NET_ERROR_TECHNOLOGY_NOT_AVAILABLE 1

Network planning technologies not available.

NET_ERROR_POINTER_NOT_DEFINED 2

Issued when a nullptr is returned during initialisation of air interfaces.

NET_ERROR_PARA_NOT_AVAILABLE 3

Unsupported parameter passed when initialising an air interface.