Working point - I, Ctrle Angle, N - Hairpin

Positioning and objective

The aim of the test “Working point – Sine wave – Motor – I, Ψ, N – Hairpin” is to characterize the behavior of the machine, when operating at the targeted input values I, Ψ, N (Magnitude of current, Control angle, Speed) in case of the machine is built with a hairpin winding technology.

The resulting model is fully parameterized, and it is built in Altair^® Flux^® 2D environment, transient application.

Note:

The same principle for the test “Working point – Sine wave – Motor – I, Ψ, N” is applied.

Inputs are the same, but in that case only “All phases” option is available for defining the represented coil conductors.