Warning messages

1. Standard warnings

In the DESIGN, TEST or EXPORT area of Motor Factory, warning messages can be issued.

They are stored on the right bottom part of the screen.



1 Location of the warning messages.

The number (3 in the example) indicates the number of warning messages to read.

2 When the test is running or when designing a machine, messages can appear on the screen to notify user about some warnings to check.


1 Click on the warning message icon to open the corresponding dialog box.
2 Dialog box dedicated to display warning messages.
3 Each warning message can be visualized by clicking on: “see details”.
4 Clicking on “See details” allows to read the warning message.
5 All the warning messages can be removed from the list by clicking on the bin icon.

2. Case of a design fault

Motor Factory Design environment button and winding icon in the Stator section can be colored in red. This meaning that a design fault must be corrected in the winding section of the design environment.



Motor Factory Design environment button and the winding icon in the Stator section are colored in red.= a design fault must be corrected

Therefore, the tests cannot be performed; the tooltip message indicates that the slot filling is not valid, and the user must modify the slot filling parameters to unlock the test.

At the same time, a warning message indicates that there is not enough space for the specified number of wires. The allowed number of wires is mentioned in comparison with the targeted ones.



The tests cannot be performed