PartFactory

Main areas of Part Factory

1. Overview

To build a machine, parts are needed. Three main families of parts can be considered: the slots, the magnets and the bars.

All the properties needed to build a part are defined and written in dedicated Excel files.

The process to build them is about the same. All the basic parameters are listed below.

Part Factory is a dedicated application to allow the creation or the modification of parts, i.e. the customization of parts.

Part Factory consists of two main areas:

• The DESIGN area to visualize and modify the properties of parts
• The TEST area to evaluate the relevance and the robustness of the part being built.To reach one of these areas just click on the corresponding button.

	1	Get into the DESIGN area of Part Factory.
	2	Get into the TEST area of Part Factory.

2. DESIGN area of the Part Factory application

DESIGN area of PART FACTORY - Refer to the chapter: PART FACTORY – DESIGN

3. TEST area of the Part Factory application

TEST area of PART FACTORY - Refer to the chapter: PART FACTORY – TEST