Intellectual Property Rights Notice

Copyrights, trademarks, trade secrets, patents and third party software licenses.

Altair One™ 2022 Copyright © 1994-2022.

Altair Engineering Inc. Copyright © 1986-2022. All Rights Reserved.

Copyrights in the below are held by Altair Engineering, Inc., except where otherwise explicitly stated. This Intellectual Property Rights Notice is exemplary, not exhaustive.

Note: Pre-release versions of Altair software are provided ‘as is’, without warranty of any kind. Usage of pre-release versions is strictly limited to non-production purposes.

Altair HPC & Cloud Products

Altair® PBS Professional® ©1994-2022

Altair Control™ ©2008-2022; (formerly PBS Control)

Altair Access™ ©2008- 2022; (formerly PBS Access)

Altair Accelerator™ ©1995- 2022; (formerly NetworkComputer)

Altair Accelerator Plus™ ©1995- 2022; (formerly WorkloadXelerator)

Altair FlowTracer™ ©1995- 2022; (formerly FlowTracer)

Altair Allocator™ ©1995- 2022; (formerly LicenseAllocator)

Altair Monitor™ ©1995- 2022; (formerly LicenseMonitor)

Altair Hero™ ©1995- 2022; (formerly HERO)

Altair Software Asset Optimization™ (SAO) ©2007- 2022
Note:

Compute Manager™ ©2012-2017 is now part of Altair Access

Display Manager™ ©2013-2017 is now part of Altair Access

PBS Application Services™ ©2008-2017 is now part of Altair Access

PBS Analytics™ ©2008-2017 is now part of Altair Control

PBS Desktop™ ©2008-2012 is now part of Altair Access, specifically Altair Access desktop, which also has Altair Access web and Altair Access mobile

e-Compute™ ©2000-2010 was replaced by “Compute Manager” which is now Altair Access

Altair Simulation Products

Altair AcuConsole™ ©2006-2022

Altair AcuSolve™ ©1997-2022

Altair Activate® ©1989-2022 (formerly solidThinking Activate)

Altair Compose® ©2007-2022 (formerly solidThinking Compose)

Altair ConnectMe™ ©2014-2022

Altair EDEM™ ©2005-2022 DEM Solutions Ltd, © 2019-2022 Altair Engineering, Inc.

Altair ElectroFlo™ ©1992-2022

Altair Embed® ©1989-2022 (formerly solidThinking Embed)
  • Altair Embed SE ©1989-2022 (formerly solidThinking Embed SE)
  • Altair Embed / Digital Power Designer ©2012-2022
  • Altair Embed Viewer ©1996-2022

Altair ESAComp™ ©1992-2022

Altair Feko™ ©1999-2014 Altair Development S.A. (Pty) Ltd.; ©2014-2022 Altair Engineering Inc.

Altair Flux™ ©1983-2022

Altair FluxMotor™ ©2017-2022

Altair HyperCrash™ ©2001-2020

Altair HyperGraph™ ©1995-2022

Altair HyperLife™ ©1990-2022

Altair HyperMesh™ ©1990-2022

Altair HyperStudy™ ©1999-2022

Altair HyperView™ ©1999-2022

Altair HyperWorks™ ©1990-2022

Altair HyperXtrude™ ©1999-2022

Altair Inspire™ ©2009-2022 including Altair Inspire Motion, Altair Inspire Structures, and Altair Inspire Print3D

Altair Inspire Cast ©2011-2022 (formerly Click2Cast)

Altair Inspire ElectroFlo ©1992-2022

Altair Inspire Extrude Metal ©1996-2022 (formerly Click2Extrude - Metal)

Altair Inspire Extrude Polymer ©1996-2022 (formerly Click2Extrude - Polymer)

Altair Inspire Form ©1998-2022 (formerly Click2Form)

Altair Inspire Friction Stir Welding ©1996-2022

Altair Inspire Mold ©2009-2022

Altair Inspire PolyFoam ©2009-2022

Altair Inspire Play ©2009-2022

Altair Inspire Render ©1993-2016 Solid Iris Technologies Software Development One PLLC, © 2016-2021 Altair Engineering Inc (formerly Thea Studio)

Altair Inspire Resin Transfer Molding ©1990-2022

Altair Inspire Studio ©1993-2022 (formerly ‘Evolve’)

Altair Manufacturing Solver™ © 2011-2022

Altair Material Data Center ©2019-2022

Altair MotionSolve™ ©2002-2022

Altair MotionView™ ©1993-2022

Altair Multiscale Designer™ ©2011-2022

Altair nanoFluidX™ ©2013-2018 Fluidyna GmbH, © 2018-2022 Altair Engineering Inc.

Altair newFASANT ©2010-2022

Altair OptiStruct™ ©1996-2022

Altair PollEx ©2003-2022

Altair Radioss™ ©1986-2022

Altair Seam™ © 1985-2019 Cambridge Collaborative, Inc., © 2019-2022 Altair Engineering Inc.

Altair SimLab™ ©2004-2022

Altair SimSolid™ ©2015-2022

Altair ultraFluidX™ ©2010-2018 Fluidyna GmbH, © 2018-2022 Altair Engineering Inc.

Altair Virtual Wind Tunnel™ ©2012-2022

Altair WinProp™ ©2000-2022

Altair WRAP ©1998-2020 WRAP International AB, © 2020-2022 Altair Engineering AB

Altair Packaged Solution Offerings (PSOs)

Altair Automated Reporting Director™ ©2008-2022

Altair GeoMechanics Director™ ©2011-2022

Altair Impact Simulation Director™ ©2010-2022

Altair Model Mesher Director™ ©2010-2022

Altair NVH Director™ ©2010-2022

Altair Squeak and Rattle Director™ ©2012-2022

Altair Virtual Gauge Director™ ©2012-2022

Altair Weight Analytics™ ©2013-2022

Altair Weld Certification Director™ ©2014-2022

Altair Multi-Disciplinary Optimization Director™ ©2012-2022

Altair Data Analytics Products

Altair Knowledge Studio® © 1994-2020 Angoss Software Corporation, © 2020-2022 Altair Engineering, Inc.

Altair Knowledge Studio for Apache Spark © 1994-2020 Angoss Software Corporation, © 2020-2022 Altair Engineering, Inc.

Altair Knowledge Seeker™ © 1994-2020 Angoss Software Corporation, © 2020-2022 Altair Engineering, Inc.

Altair Knowledge Hub™ © 2017-2020 Datawatch Corporation, © 2020-2022 Altair Engineering, Inc.

KnowledgeWorks™ © 2022 Altair Engineering, Inc.

Altair Monarch™ © 1996-2020 Datawatch Corporation, © 2020-2022 Altair Engineering, Inc.

Altair Monarch Server © 1996-2020 Datawatch Corporation, © 2020-2022 Altair Engineering, Inc.

Altair Panopticon™ © 2004-2020 Datawatch Corporation, © 2020-2022 Altair Engineering, Inc.

Altair SmartWorks™

Altair SmartCore™ © 2011-2022

Altair SmartEdge™ © 2011-2022

Altair SmartSight™ © 2011-2022

Altair One™ ©1994-2022

Altair intellectual property rights are protected under U.S. and international laws and treaties. Additionally, Altair software may be protected by patents or other intellectual property rights. All other marks are the property of their respective owners.

ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information.

Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair software shall not be decompiled, disassembled, “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner. Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply publication.

Third party software licenses

AcuConsole contains material licensed from Intelligent Light (www.ilight.com) and used by permission.

Software Security Measures:

Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security mechanisms in the Software for the purpose of detecting the installation and/or use of illegal copies of the Software. The Software may collect and transmit non-proprietary data about those illegal copies. Data collected will not include any customer data created by or used in connection with the Software and will not be provided to any third party, except as may be required by law or legal process or to enforce our rights with respect to the use of any illegal copies of the Software. By using the Software, each user consents to such detection and collection of data, as well as its transmission and use if an illegal copy of the Software is detected. No steps may be taken to avoid or detect the purpose of any such security mechanisms.