Torque
Input signal acting as external torque on a flange
Library
Modelica/Mechanics/Rotational/Sources
Description
The input signal tau defines an externaltorque in [Nm] which acts (with negative sign) ata flange connector, i.e., the component connected to thisflange is driven by torque tau.
The input signal can be provided from one of the signal generatorblocks of Modelica.Blocks.Sources.
Parameters
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_useSupport | useSupport | = true, if support flange enabled, otherwise implicitly grounded | Number | 0 |
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo__nmodifiers | Number of Modifiers | Specifies the number of modifiers | Number | |
mo__modifiers | Modifiers | Add new modifier | Structure | |
mo__modifiers/varname | Variable name | Cell of strings | 'phi_support' | |
mo__modifiers/attribute | Attribute | Cell of strings | 'start' | |
mo__modifiers/value | Value |
Ports
| Name | Type | Description | IO Type | Number |
|---|---|---|---|---|
flange | implicit | Flange of shaft | output | 1 |
tau | implicit | Accelerating torque acting at flange (= -flange.tau) | input | 1 |
Port 3 | implicit | Support/housing of component | input | mo_useSupport |