SimplePump
Simple Pump
Library
HydraulicsByFluidon/Components/Pumps/Base
Description
The component SimplePump is an ideal flow source. While the mass flow is constant, the resulting volume flows at both ports depend on the corresponding pressures and fluid temperatures. The parameter nominalVolumeFlow refers to the flow at Port A (suction side).
The component does not provide a model of the physical design of a pump but only copies its characteristic features. Thus, physical parameters (e. g. inertia moment or hydraulic-mechanical efficiency) are not parameterized.
Parameters
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_nominalVolumeFlow | nominalVolumeFlow | Nominal volume flow | Scalar | |
mo_intFlowDemand | intFlowDemand | Scalar | true |
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_forwardFluidProperties | forwardFluidProperties | Forward fluid properties between ports | Scalar | true |
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_volumeFlowA | volumeFlowA | volumeFlowA | Structure | |
mo_volumeFlowA/fixed | fixed | Cell of scalars | true | |
mo_volumeFlowA/start | start | Cell of scalars | ||
mo_volumeFlowB | volumeFlowB | volumeFlowB | Structure | |
mo_volumeFlowB/fixed | fixed | Cell of scalars | true | |
mo_volumeFlowB/start | start | Cell of scalars | ||
mo_pA | pA | pA | Structure | |
mo_pA/fixed | fixed | Cell of scalars | true | |
mo_pA/start | start | Cell of scalars | ||
mo_pB | pB | pB | Structure | |
mo_pB/fixed | fixed | Cell of scalars | true | |
mo_pB/start | start | Cell of scalars | ||
mo_volumeFlow | volumeFlow | volumeFlow | Structure | |
mo_volumeFlow/fixed | fixed | Cell of scalars | true | |
mo_volumeFlow/start | start | Cell of scalars |
Ports
| Name | Type | Description | IO Type | Number |
|---|---|---|---|---|
fluidPortA | implicit | Hydraulic port A | input | 1 |
fluidPortB | implicit | Hydraulic port B | input | 2 |