Standard package icon.
Extends from Modelica.Icons.Package
(Icon for standard packages).
Name | Description |
---|---|
PartialCCPumpWithLeakage |   |
PartialDisplacementPump |   |
PartialPumpWithLeakage |   |
SimplePump | Simple Pump |
The component SimplePump is an ideal flow source. While the mass flow is constant, the resulting volume flows at both ports depend on the corresponding pressures and fluid temperatures. The parameter nominalVolumeFlow refers to the flow at Port A (suction side).
The component does not provide a model of the physical design of a pump but only copies its characteristic features. Thus, physical parameters (e. g. inertia moment or hydraulic-mechanical efficiency) are not parameterized.
Extends from HydraulicsByFluidon.Components.Pumps.Interfaces.PartialPumpOneDir
.
Type | Name | Default | Description |
---|---|---|---|
Boolean | forwardFluidProperties | true | Forward fluid properties between ports |
VolumeFlowRate | nominalVolumeFlow | 5e-4 | Nominal volume flow |
Type | Name | Description |
---|---|---|
FluidPort | fluidPortA | Hydraulic port A |
FluidPort | fluidPortB | Hydraulic port B |
Extends from HydraulicsByFluidon.Components.Pumps.Interfaces.PartialPumpOneDir
.
Type | Name | Default | Description |
---|---|---|---|
VolumeFlowRate | nominalVolumeFlow | 5e-4 | Nominal volume flow, A -> B |
Volume | deadVolume | 1e-6 | Dead volume at ports |
VolumeFlowRate | leakageFlowRateInternal | 1e-5 | Internal leakage: volume flow |
Pressure | leakagePressureDiffInternal | 1e+7 | Internal leakage: pressure difference |
VolumeFlowRate | leakageFlowRateExternal | 0 | External leakage: volume flow |
Pressure | leakagePressureDiffExternal | 1e+7 | External leakage: pressure difference |
Density | leakageReferenceDensity | 860 | Reference density for volume flow and pressure difference |
Boolean | useLeakagePort | false | Enable leakage port, otherwise implicitly connected with tank |
Boolean | forwardFluidProperties | true | Forward fluid properties between ports |
Type | Name | Description |
---|---|---|
FluidPort | fluidPortLeakage | Hydraulic port Leakage |
FluidPort | fluidPortA | Hydraulic port A |
FluidPort | fluidPortB | Hydraulic port B |
Extends from HydraulicsByFluidon.Components.Pumps.Interfaces.PartialPumpTwoDir
.
Type | Name | Default | Description |
---|---|---|---|
VolumeFlowRate | nominalVolumeFlow | 5e-4 | Nominal volume flow, A -> B |
Volume | deadVolume | 1e-6 | Dead volume at ports |
VolumeFlowRate | leakageFlowRateInternal | 1e-5 | Internal leakage: volume flow |
Pressure | leakagePressureDiffInternal | 1e+7 | Internal leakage: pressure difference |
VolumeFlowRate | leakageFlowRateExternal | 0 | External leakage: volume flow |
Pressure | leakagePressureDiffExternal | 1e+7 | External leakage: pressure difference |
Density | leakageReferenceDensity | 860 | Reference density for volume flow and pressure difference |
Boolean | useLeakagePort | false | Enable leakage port, otherwise implicitly connected with tank |
Boolean | forwardFluidProperties | true | Forward fluid properties between ports |
Type | Name | Description |
---|---|---|
FluidPort | fluidPortLeakage | Hydraulic port Leakage |
FluidPort | fluidPortA | Hydraulic port A |
FluidPort | fluidPortB | Hydraulic port B |
Extends from HydraulicsByFluidon.Components.Pumps.Interfaces.PartialPumpTwoDir
.
Type | Name | Default | Description |
---|---|---|---|
Volume | dispVolume | 5e-5 | Displacement volume |
Inertia | Jrot | 0.05 | Rotational moment of inertia |
Volume | deadVolume | 1e-6 | Dead volume at ports |
Efficiency | etaVol | 0.94 | Volumetric efficiency @ nRef, dpRef |
Density | leakageReferenceDensity | 860 | Reference density for volumetric efficiency |
DimensionlessRatio | ratioLeakageExtern | 0 | Ratio external Leakage / total Leakage |
Boolean | useLeakagePort | false | Enable leakage port, otherwise implicitly connected with tank |
Efficiency | etaHm | 0.98 | Mechanical efficiency @ nRef, dpRef |
Real | nRef | 1000 | Reference speed (1/min) |
AbsolutePressure | dpRef | 2e+7 | Reference pressure difference |
StateSelect | stateSelect | StateSelect.prefer | Priority to use phi and w as states |
Boolean | forwardFluidProperties | true | Forward fluid properties between ports |
Type | Name | Description |
---|---|---|
FluidPort | fluidPortA | Hydraulic port A |
FluidPort | fluidPortB | Hydraulic port B |
Flange_a | flange_a |   |
Flange_b | flange_b |   |
FluidPort | fluidPortLeakage | Hydraulic port Leakage |