Bend
Bend
Library
HydraulicsByFluidon/Components/Lines
Description
The component Bend is a valid model for Bend angle between 15° and 180°.
Please consider: The component was modeled in order to consider the pressure losses of well rounded bends. However, the use of the component can lead to extremely long simulation times, since a small stepsize must be selected due to the low resistance of an elbow.
Formulas are taken from W. Wagner, Strömung und Druckverlust, 7. Auflage 2012.
Parameters
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_Diameter | Diameter | Diameter | Scalar | |
mo_BendAngle | BendAngle | Bend angle | Scalar | |
mo_BendRadius | BendRadius | Bend radius | Scalar | |
mo_relRoughness | relRoughness | Relative roughness | Scalar | |
mo_deadVolume | deadVolume | Dead volume at ports | Scalar | |
mo_enableZetaOutput | enableZetaOutput | Enable zeta output | Number | 0 |
mo_enableReOutput | enableReOutput | Enable Re output | Number | 0 |
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_forwardFluidProperties | forwardFluidProperties | Forward fluid properties between ports | Scalar | true |
| Name | Label | Description | Data Type | Valid Values |
|---|---|---|---|---|
mo_pA | pA | pA | Structure | |
mo_pA/fixed | fixed | Cell of scalars | true | |
mo_pA/start | start | Cell of scalars | ||
mo_pB | pB | pB | Structure | |
mo_pB/fixed | fixed | Cell of scalars | true | |
mo_pB/start | start | Cell of scalars | ||
mo_Zeta | Zeta | Zeta | Structure | |
mo_Zeta/fixed | fixed | Cell of scalars | true | |
mo_Zeta/start | start | Cell of scalars | ||
mo_Re | Re | Re | Structure | |
mo_Re/fixed | fixed | Cell of scalars | true | |
mo_Re/start | start | Cell of scalars |
Ports
| Name | Type | Description | IO Type | Number |
|---|---|---|---|---|
fluidPortA | implicit | Hydraulic port A | input | 1 |
fluidPortB | implicit | Hydraulic port B | input | 2 |
Port 3 | implicit | Zeta | output | mo_enableZetaOutput |
Port 4 | implicit | Re | output | mo_enableReOutput |