connector FluidPort
import HydraulicsByFluidon.Media.Base.FluidInterface;
SI.AbsolutePressure p(start = 101325, min = 0, nominal = 100000) "Pressure at the connection point";
flow SI.MassFlowRate mFlow(start = 0, nominal = 1e-5) "Mass flow rate from the connection point into the component";
input Integer fluidId(start = 0) "Fluid type ID";
input SI.Temperature fluidTemperature(start = 293) "Stationary fluid temperature";
input Real proportionUndissolvedAir(start = 0.001) "Proportion of undissolved air";
input Real polytropicExponent(start = 1.1) "Polytropic exponent";
annotation (
defaultComponentName = "port",
Documentation(info = "<html>\n <p>\n Elements of <i>FluidPort</i>:\n </p>\n <p>\n <var>p</var> absolute pressure at the connection point<br>\n <var>mFlow</var> mass flow rate from the connection point into the component<br>\n <var>FluidId</var> fluid type ID<br>\n <var>Temperature</var> stationary fluid temperature<br>\n <var>proportionUndissolvedAir</var> proportion of undissolved air<br>\n <var>polytropicExponent</var> polytropic exponent\n </p></html>"),
Diagram(
coordinateSystem(
preserveAspectRatio = false,
extent = {
{-100, -100},
{100, 100}}),
graphics = {
Ellipse(
extent = {
{-40, 40},
{40, -40}},
lineColor = {0, 93, 152},
fillColor = {0, 93, 152},
fillPattern = FillPattern.Solid),
Ellipse(
extent = {
{-40, 40},
{40, -40}},
lineColor = {0, 0, 0},
fillColor = {0, 93, 152},
fillPattern = FillPattern.Solid),
Text(
extent = {
{-160, 110},
{40, 50}},
lineColor = {0, 93, 152},
textString = "%name")}),
Icon(
coordinateSystem(
preserveAspectRatio = false,
extent = {
{-100, -100},
{100, 100}}),
graphics = {
Ellipse(
extent = {
{-100, 100},
{100, -100}},
lineColor = {0, 93, 152},
fillColor = {0, 93, 152},
fillPattern = FillPattern.Solid)}));
end FluidPort;