SS-T: 5010 Partial Response and Dynamic Reactions

Plot partial responses and reaction forces for a dynamic analysis.

Purpose
SimSolid performs meshless structural analysis that works on full featured parts and assemblies, is tolerant of geometric imperfections, and runs in seconds to minutes. In this tutorial, you will do the following:
  • Plot partial responses and reaction forces in SimSolid.
Model Description
The following model files are needed for this tutorial:
  • PartialResponse.ssp
Figure 1.


The project file has the following specifications:
  • Regular connections with a 1.5mm gap and penetration tolerance.
  • Modal and Frequency Response subcases are pre-defined.
  • Solution settings are set to Global + Local.