Parasolid CAD Tools
Following Parasolid operations are supported, if imported with "Save geometry in database" option enabled:
Note:
- Undo/Redo Support is available for the Parasolid operations when imported with "Save geometry in database" option.
- Loads and boundary conditions for CAD based solutions (Electronics Thermal and Injection Molding), Mesh controls and Groups will be retained on editing the Parasolid geometry and on performing undo / redo.
| Tool | Location |
|---|---|
| Align faces | Geometry | Feature | Align | Plane |
| Body from face | Geometry | Body | Create |
| Boolean | Geometry | Connect |
| Break | Geometry | Body | Break |
| Break faces | Geometry | Face | Edit |
| Copy and paste bodies | Body right click and shortcut keys |
| Create Body From Faces | Geometry | Body | Create | From Faces |
| Create box | Geometry | Body | Create |
| Create cylinder | Geometry | Body | Create |
| Create cylinder face | Geometry | Face | Create |
| Create disc | Only through script |
| Create fillet | Geometry | Feature |
| Create fluid domain | Geometry | Body | Drop down |
| Create rectangular face | Geometry | Face | Create |
| Create sheet body from cut section | Geometry | Body | Break | Plane |
| Create sphere | Geometry | Body | Create |
| Create volume | Advanced | Mid Surface | Create |
| Delete faces | Right click & Delete key |
| Extrude | Geometry | Body | Create |
| Fill holes | Geometry | Face | Fill |
| Fill planar loops | Geometry | Face | Fill |
| Free and Non-manifold edge | Mesh | verify | Edges |
| Imprint bodies | Geometry | Imprint |
| Imprint circle | Geometry | Imprint |
| Merge bodies | Geometry | Body | Drop down |
| Merge faces | Geometry | modify | Edit |
| MidSurface | Geometry | Body | Create |
| Model Merge | Geometry | Model | Drop down |
| Offset face | Move tool |
| Remove Details | Geometry | Feature |
| Remove Fillet | Geometry | Feature |
| Remove Hole | Geometry | Feature |
| Remove round | Geometry | Feature |
| Replace CAD Body | Geometry | Body | More Tools |
| Revolve | Geometry | Body | Create |
| Select connected faces | Geometry | Faces |
| Sew | Geometry | Body | Drop down |
| Shared entities | Geometry | Connect |
| Simplify Fasteners | Geometry | Body | More tools |
| Sweep | Geometry | Body | Create |
| Transfer bodies to model | Drag and drop |
| Translate Face | Move tool |
| Translate faces | Transform | Align |
| Translate, Rotate, Mirror, Offset | Geometry | Transform |
| Unmerge | Body right click |
| Unmerge Associated Bodies | Face right click |