E-BOM List Menu

Edit the master BOM.

  • : Click to display the design project information.


    Figure 1.
  • : Select the sorting criteria.
    • Sort by reference: Sort the BOM list by the reference designator.


      Figure 2.
    • Sort by part number: Sort the BOM list by the part number.


      Figure 3.
  • : Category for priority sorting to see errors.
    • Changed part (before application): Give priority to the changed part.
    • Lock part Library: Give priority to the locked part.
    • CPN not found: Give priority to the part which doesn’t have a CPN.
    • Different part information compared to UPMS: Give priority to the part which has different properties to the part in UPMS.
    • The part included verification fail: Give priority to the part that failed verification.
  • Click Sorting to sort with the selected condition.
  • : Edit
    • In this menu, you can add, change and delete parts and can add and edit parts which are not included in the design.


    Figure 4.

Part Change

When changing a part, only part with the same footprint is listed in the list.

Part can be changed when the footprint of a new part is the same with the existing part. If the footprint is different, a serious defect occurs when the changed part is placed on the PCB.


Figure 5.

If there are variants, then you can select the variants to reflect.

  • Select variants: Apply to the selected variants.
  • ALL: Apply to all including the master.
  • ONLY MASTER: Apply to the master only.
  • CANCEL: Cancel to change.

Setting Not Used Part on Variant

In this menu, you can set the not used part in the variant BOM.


Figure 6.

Add Mechanical Part

To add a mechanical part to BOM, the part should be registered in the UDE system before adding.


Figure 7.
Click Search to select parts from the parts list to add them.


Figure 8.
When saving, if there is a variant, you need to select which one to reflect.


Figure 9.

Modify Mechanical Part

Modify the mechanical part information. The mechanical part can be modified with its part number and quantity information. The modification function is the same as add mechanical part.


Figure 10.

Delete Mechanical Part

When deleting, select the application type and proceed the same as the part change.



Figure 11.

Alternative Part

Define the alternative parts to a part.


Figure 12.
To add an alternative part, select a part and drag to the right area for adding.


Figure 13.
To delete an alternative part, select a part to be deleted and click Delete.


Figure 14.
Click Applied to apply and finish.
  • : Export to Excel
    • All: Export all list to an excel file.
    • Compare (Derivation):Export the different items only.
  • : Unit price calculation. By using the unit price calculation menu, you can estimate the total cost.


    Figure 15.
    You can export the price list to an excel.


    Figure 16.