Check messages from systems such as the results of requests and other requests for your approval, change information
of part use, change your designation as the person in charge of the development process, and check the KPIs for the
status in Parts Registrations and Design Revisions.
If there is a schematic verification process in the design project, the verification will be performed automatically
after generating schematic outputs.
The design process workflow is based on the process of the design
project.
You can proceed every stage with workflow. For checking or proceeding the design
process workflow, click the model’s name on the design project list. Figure 1.
If the design project was newly created and has not yet started, it will look like
below and assign a person in charge for each stage is needed.
Note: The process includes both design and verification created
for explanation and may vary depending on the setting status of the
project.
Select Person in charge in the Design Menu and click to assign a person in charge for each stage.
Schematic Design Check-Out
The design process starts from check out the schematic design. Only the person in charge can check out and check in.
Schematic Verification
If there is a schematic verification process in the design project, the verification will be performed automatically after generating schematic outputs.
PCB Verification
If there is a PCB verification process in the design project, the verification will be performed automatically after generating PCB outputs.